America's Largest Suppressor Dealer ATF Wait Times
Designed for rimfire rifles and pistols, .22 caliber and smaller. The BANISH RF 22 T…
$549.00
Designed for your hunt. Built for your budget. The BANISH HNT 30 SS is a welded, sta…
$499.00
Rated for calibers up to the .300 Remington Ultra Magnum (RUM), the BANISH HNT Backc…
$1,099.00Designed for rimfire rifles and pistols, .22 caliber and smaller. The BANISH RF 22 TI is as close to “Hollywood Quiet” as you can get without sound effects.
In the event you need you rifle barrel threaded to accept your new silencer, we will take care of that as well through our Threading Central. Learn More
The BANISH RF 22 TI suppressor is designed for use with rimfire pistols and rifles chambered in .22 caliber and smaller. This includes .22 Hornet, .17HMR, and even 5.7x28. It’s even rated for full-auto!
Using 1/2x28 threads for direct attachment, the BANISH RF 22 TI is made of lightweight titanium, weighs just 4.1oz, is 1” in diameter, and only 5 ⅜” long. This means you’ll barely even notice that the BANISH RF 22 TI is on the end of your gun - except when it comes to sound reduction.
Tests have shown that the BANISH RF 22 TI brings the sound down to about 120 decibels, making it barely louder than a BB-gun. Essentially, this is as close to “Hollywood quiet” as you can get. At the muzzle, the BANISH RF 22 TI tested at 116.8 dB on a 22LR with a 16" barrel and 117.6 dB at the muzzle on a Ruger Mark IV.
Since rimfire ammo uses projectiles that are not jacketed, lead buildup and carbon fouling are a real concern in a rimfire silencer. Over time without cleaning, it’s possible for a .22 suppressor to completely fill with lead and carbon, rendering it ineffective for sound suppression and adding considerable weight.
The BANISH RF 22 TI was designed specifically to maximize your time shooting and minimize your time cleaning. Inside the tube are eight baffles that are engineered for a precise fit to keep lead debris and carbon buildup at an absolute minimum. This prevents the debris and buildup from reaching the tube, which causes components to fuse together.
Once disassembled, cleaning couldn’t be simpler: toss the baffles in a tumbler, ultrasonic cleaner, or use good, old-fashioned elbow grease.
With indexing lines on each baffle for easy realignment and reassembly, the BANISH RF 22 TI is the only rimfire silencer on the market that is user-serviceable from both ends.
If you’re looking for the perfect first-time silencer purchase, the BANISH RF 22 TI is a great option. It’s ideal for varmint shooting, small game hunting, target practice, and more.
*Formerly known as the BANISH 22, this suppressor delivers the same reliable performance under its new product name.
The internal baffles handle the gas in such a way that the suppressor significantly reduces recoil as well as sound.
All BANISH® suppressors accommodate calibers that are smaller in diameter than marked.
100% made and assembled in the United States.
Suppressors get dirty, that is just a fact of suppressor use. However, suppressors that cannot be easily cleaned quickly build up lead and powder residue, which increases their weight and decreases their performance. This isn’t a problem with BANISH® CanClean technology. No special tools are required to take your BANISH Suppressor apart, making this one of the fastest cleaning suppressors on the market today.
A truly universal baffle stack, these baffles are used in all BANISH suppressors and can be reassembled in any order. This user-friendly design allows for the shooter to quickly clean and put their BANISH® Suppressor back together, or reconfigure the suppressor length with minimal effort.
Made from an extremely sturdy titanium alloy, BANISH® weighs only 4.1 oz, yet is tough enough for years of service to a frequent shooter.
| Product |
BANISH
BANISH RF 22 TI
As low as
$549.00
$629.00
|
Dead Air
Dead Air MASK 22
As low as
$459.00
$489.00
|
Nosler
Nosler SR-22ALTI
As low as
$769.00
$799.00
|
|---|---|---|---|
| Brand |
BANISH
|
Dead Air
|
Nosler
|
| Length |
5.2"
|
5.1 inches
|
7.533"
|
| Diameter |
1"
|
1.07 inches
|
1.740"
|
| Suppressor Weight |
4.1 oz
|
6.6 ounces
|
9 OZ.
|
| Caliber Range |
.22 and smaller
|
.17 HRM to 5.7x28
|
5.56 AND SMALLER
|
| Caliber |
.22
|
.22
|
.223, 5.56
|
| Product Status |
In stock
|
In stock
|
In stock
|
The Mask 22 from Dead Air is a lightweight and user-serviceable rimfire suppressor capable of handling 17 HRM to 5.7x28. Additionally, the .22 caliber suppressor is full auto rated for .22LR.
Mounting to rimfire hosts is fast and repeatable with the direct-thread ½” x 28 mount. The user-serviceable blast baffle and baffle stack delivers an exceptionally quiet and smooth shooting experience on 22 LR, 22 MAG, 22 WMR and 17 HMR firearms.
The SoLo 22 is a popular rimfire suppressor that utilizes aircraft grade aluminum and is anodized matte black.
