
Firearms Hunting
Best Suppressors for the .30-06 Rifle
The .30-06 is probably the most well-known hunting cartridge in existence, at least here in the U.S. It is the benchmark that all other big-game cartridges are compared to and measured by. You will often see a new cartridge hit the market and have gun writers salivate all over it, but then check the forums and find a lot of comments along the lines of, "The new (insert new cartridge here) doesn't do anything the .30-06 didn't already do." Let's face it, the .30-06 isn't sexy, but it sure gets the job done. In fact, no other cartridge comes close in the number of big game animals taken across North America, It makes sense to look at suppressing the .30-06, and as a bonus, if it works for the '-06, it'll work on just about any other .30-caliber rifle and below.
No respect, I tell ya!
These days, for whatever reasons, the .30-06 gets no respect from many. It's like the Rodney Dangerfield of cartridges. If you don't get the Dangerfield reference, go ask your parents.
It is likely because it is seen as the previous generation's cartridge. There are newer cartridges that perform great, and since we tend to like shiny things, we are attracted to the new stuff. 6.5 Creedmoor, we're looking at you. What we need to keep in mind is that the .30-06 is the benchmark we measure any new rifle cartridge against. That's why you'll see a few guys in every forum saying the same thing about any new cartridge being discussed - "It won't do anything the .30-06 already did."
Ammo is plentiful, and often lower in initial cost, making the .30-06 a popular choice for hunters looking to save some money. There are a lot of budget-friendly, yet quality rifles to be found, too.
Why suppress you Ought Six?
From a historical standpoint, the .30-06 was developed as a military cartridge. It was adopted in 1906 by the US Government and lauded by shooters and hunters for more than a century, the venerable "thirty-ought-six" is a cartridge that has certainly stood the test of time. Plus, it is a big cartridge, and it makes a lot of noise.
Going all the way to Hiram Maxim's first silencer in 1909, he initially marketed it for the .30-06 bolt-action rifles being used by the military. Maxim knew that there was a need to quiet this caliber down, and for more than 100 years, companies have been building upon what he started.
Today, the market for a suppressor that is suited to the .30-06 cartridge is plentiful - something that Mr. Maxim would certainly be proud to know! However, all those choices can make it hard to pick the right one for your needs.
Our picks for the best .30-06 suppressors
Like every list, we base our picks from experience. The team at Silencer Central is made up of people who hunt and shoot a lot. We use and abuse every can that comes through our doors for evaluation. We don't take these recommendations lightly, and give you our honest, no-BS assessment.
Editor's Pick - BANISH 30

Of course we have to suggest the BANISH 30. It goes together with the .30-06 like bread and butter. The BANISH 30 is the best .30 caliber suppressor for the '-06 because we designed it to be that way. From. 300 Remington Ultra Magnum, the BANISH 30 has got you covered. Again, we might be a bit biased, but the BANISH 30 is a fantastic multi-caliber, lightweight suppressor that you can take apart and clean yourself.
Depending on what you’re hunting, you can use the BANISH 30 in its full 9” configuration weighing 13 ounces, or you can remove the tube extension and drop it down to just 7” overall weighing 11 ounces.
What customers say:
"This is my first suppressor but it will not be my last! Absolutely love this Banish 30! Process was so easy and quick plus the suppressor works better than I was expecting! Swapping between 2 rifles and muzzle velocity remained consistent with both. POI was altered a good bit but once rifles were re-sited in, their accuracy was right back to sub 1/2" groups for both! It has been a win-win!" William F.
Features/Advantages:
- User-serviceable
- Can be used with a wide variety of calibers
- All titanium construction means lightweight
Disadvantages:
- Higher cost compared to some sealed stainless steel competitors
- Direct thread only with no quick detach option
Specs: BANISH 30
- Caliber: Up to .300RUM
- Weight: 11.2 oz.
- Length: 7”-9”
- Sound reduction: 34 dB
Price: $999
Dead Air Sandman-S

Dead Air's Sandman suppressors have great reputations and with good reason. The Sandman-S is the "little brother" to the Sandman-L, and while it may be smaller, it still retains all of the performance. Featuring a low blowback design, the Sandman-S is touted for not only its compact construction but also for its impressive noise reduction at the ear. That makes it a great option for a .270 Winchester suppressor.
The Dead Air Sandman-S features a quick-detach mounting system that incorporates an index pattern for ease of mounting and removal. It's also outfitted with a removable front-end cap, making the Sandman-S extremely user-serviceable, allowing for quick disassembly, cleaning, and fast reassembly.
What customers say:
"This thing is a whole different animal. Threw this on my .308 build and definitely a heavy robust monster. It’s compliments the build well as it big the handguard perfectly. Putting in 50rds after the install is night and day difference. Not much as to being hearing protection proof but definitely suppresses concussions and help taming the crack. Thanks Silencer Central!!" Jerry T.
Why We Like It:
- QD mounting system for easy on-off
- User-serviceable for easy cleaning
- Great sound reduction for the size
Specs:
- Weight: 17.7 oz
- Length: 6.8"
- Finish: Cerakote
- Materials: Stainless Steel and Stellite
Price: $999
Premium Pick - MeatEater by BANISH

The MeatEater by BANISH silencer is the most advanced can we've built with hunters in mind. It works great for the .30-06 and any other rifle in the .30 range. It is built for performance and rated for cartridges up to .300 RUM.
The big news is the groundbreaking anchor brake that reduces recoil by up to 40% in the open position and 30% when closed, while also delivering an additional 5 dB of sound reduction. Overall, this amazing suppressor cuts average sound levels by a whopping 32 dB. It is one of the key features the MeatEater crew asked for in a new suppressor and the engineers delivered big time. It allows you to adjust your shooting experience to exactly what you need it to be.
But that’s not all. It uses interchangeable muzzle cap inserts that accommodate various calibers, allowing users to optimize the suppressor for their specific rifle setup. While it is, in essence, a .30-caliber can, you can set it up to work with your specific caliber, like a 6.5 or something else.
The MeatEater by BANISH can is constructed from lightweight titanium. The suppressor weighs just 10.3 ounces, measures 5.85 inches in length, and has a 1.73-inch diameter with an industry-standard hub mount. When you look at everything this can does and then to see how compact it is, it’s not hard to see why we feel the design team deserves a round of applause.
What we like:
- Adjustable anchor brake
- User-serviceable
- Lightweight titanium construction
Specs: BANISH Backcountry
- Caliber: Rimfire to .300RUM
- Weight: 10.3 oz
- Length: 5.85”
- Sound reduction: 32 dB
Price: $1,299
SilencerCo Omega 300

SilencerCo's Omega 300 is the lightest, shortest, quietest, full-auto-rated, titanium silencer in its category. If you like to have choices and options, it even comes complete with direct thread and fast-attach mounts, as well as a removable Anchor Brake to reduce recoil, which can be replaced with a flat front cap if you don't need the brake.
The Omega 300 is popular for all sorts of .30-caliber chamberings, as well as slightly smaller ones like the .270 Winchester. That makes it one of the best multi-caliber suppressors in its class, so it will be right at home on a variety of other rifles, too. You aren't just limited to the .270 Winchester, so try it out with .308, .30-06, .300 Blackout, etc.
What customers say:
"I purchased the Silencerco Omega 300 for its ability to make shooting less noisy. What I did not expect was how it really helped with recoil management and improved accuracy. The best I was able to achieve with my .308 rifle and ammo before was a 1,5 moa grouping. With the Silencerco Omega 300 added to the mix (same gun and ammo) I was able to quickly get my best grouping down to .75 moa! So, very happy with this purchase and what it has done for my shooting experience." Scott C.
Why We Like It:
- Multiple mounting options come with it
- Comes with a brake in the box
- Best in class specs in its category
Specs:
- Weight: 14.8 oz
- Length: 7"
- Finish: Black or FDE
- Materials: Cobalt, Inconel, Stainless Steel, and Titanium
Price: $915
Budget Pick - Buck 30 by BANISH

The BUCK 30 by BANISH is a high-performance hunting suppressor designed in partnership with Buck Commander. It's a budget-friendly .30 can that is a great choice for the .30-06, especially if you're trying to keep overall costs down.
The BUCK 30 is a multi-caliber suppressor that works with all rifle calibers up to .300 Winchester Magnum. That makes it the perfect choice for all of your hunting adventures no matter how big or small.
Made of stainless steel and laser welded for precision and durability, the BUCK 30 features the Buck Commander logo proudly displayed on its tubeless construction. At just 6.9” in length and 1.54” in diameter, it weighs only 13.8 oz.
What customers say:
"I put the buck 30 on a Remington 700 in 308win with 18 1-2” barrel. Used ten thousands shim and it lined up great - Only moved bullet impact about 1-1/2.“ After installing buck 30 suppressor I shot a three shot group at 100 yards and recoil was great. It felt like it reduced recoil about 50%. Looking forward to hunting with it in about a month. The paperwork and wait was a bit worry some but very glad to have now. It performs great so far. A great product that I’m glad to have and may order another when time is not such an issue for me." John W.
What we like:
- Very cost effective
- Very quiet - surprisingly quiet actually
- Multi-caliber ready
Specs:
- Length: 6.9"
- Diameter: 1.54"
- Weight: 13.8 oz.
- Materials: Stainless Steel
Price: $699
How to Choose the Right Silencer for Your .30-06
We could say that any suppressor rated for .30/7.62 caliber would work for your .30-06. We won't though. Some of them are aimed at specific uses, like AR-platforms and more. For the most part, however, any .30 caliber can will work for the cartridge.
There are a bunch of things to consider in this area, but we will go over two of the biggest ones that you'll need to keep in mind: price and intended use.
Price of the Suppressors
For most of us, money is a big concern and the price tag on a suppressor is going to definitely play a role in what is ultimately chosen. Of course, just because a can is inexpensive doesn't mean it's of poor quality, and the opposite is also true. Just because it costs a bunch, doesn't mean it has the best performance.
The beauty of Silencer Central is - we sell just about every suppressor brand on the market - and we're adding more all the time. The ones we listed in this story are our favorites for the .30-06, but there are more options, too. Only you can truly set your budget and features needed for your needs.
Also, don't forget to factor in the $200 NFA tax stamp that you'll have to get to complete the suppressor purchase, too. Unfortunately, that price is fixed and there's no shopping around for a better deal on one.
Use of the Gun
The rifle that you mount your can to will also play a role in what one you choose. For example, if you're doing bench rest shooting, then the weight is of less importance than if you would be hiking all over the place on a big game hunting trip. The same goes for the length of the suppressor. Tight quarters necessitate a shorter suppressor, and with some options, you can choose from long or short configurations depending on your needs.
Another example would be deer hunters. My first hunting rifle was a Winchester Model 70 in .30-06. It is one of my favorite deer rifles to this day. I use it around the Midwest, and usually from a stationary and elevated blind. I can let the barrel hang out the window, so size and weight don't matter as much to me. My choice? I went with a BANISH 30. It stays with that "ought six," too. I don't like to break up a winning team.
Find the Best Silencer for the .30-06 Cartridge
The market for suppressors is plentiful, and narrowing it down to the right one for you can be confusing. Thankfully, our staff has been shooting and selling suppressors for more than 15 years. Suffice it to say that we’ve got a pretty good handle on which silencers pair best with certain guns and calibers, like the .30-06 cartridge. If you’re having trouble deciding, don’t hesitate to reach out to us. We’ll happily talk you through the options and then, when you’re ready, get you on your way to silencer ownership and suppressed shooting!
… it’s not hard to see why we feel the design team deserves a round of applause.
What we like:
Adjustable anchor brake
User-serviceable
Lightweight titanium construction
Specs: BANISH Backcountry
Caliber: Rimfire to .300RUM
Weight: 10.3 oz
Length: 5.85”
Sound reduction: 32 dB
Price: $1,299
Buy the MeatEater by BANISH
SilencerCo Omega 300
SilencerCo‘s Omega 300 is the lightest, shortest, quietest, full-auto-rated, titanium silencer in its category. If you like to have choices and options, it even comes complete with direct thread and fast-attach mounts, as well as a removable Anchor …

Firearms Hunting
The Best Suppressors For .270 Winchester Deer Hunting Ammo
The .270 Winchester, AKA .270 Win and .270, was introduced almost a century ago, but it has a following that is arguably larger than it was when it was first introduced. Many consider it to be the best deer hunting rifle of all time and there are elk, bear and other big game species hunters that would agree. Initially relegated to the backseat because of the .30-06 Springfield cartridge, the .270 picked up steam after World War II and it really hasn't slowed down since then.
There are those who consider the .270 the greatest all-around hunting caliber. Famed gun writer Jack O'Connor was among them, O'Connor heavily favored the .270 chambered in his personal Winchester Model 70 rifle.
Whether you're doing hog control, hunting plains game, or on a mountainous trek, the .270 Winchester is right at home in all of those situations - and plenty more. The only way to truly improve on the .270 Winchester is by adding a suppressor to your setup. That's why we've put together a list of some of the best suppressors on the market for the .270 cartridge. and for the few of you who wonder, yes, every one of the cans listed in this article will work just fine with those of you shooting the .270 WSM, a round that doesn't get the love it deserves.
WHY you should USE A SUPPRESSOR
As you might imagine, this is a question we get a lot. The answer is simple - you need to protect your hearing. The decibel level from a gun shot is high enough to do permanent damage to your hearing. The .270 in any form is still loud, and a suppressor can help.
Shoot on mute
Lowering the decibel output of any activity to down below the threshold for permanent damage to your hearing is a good thing. For short, impactful hearing damage, such as you would encounter hunting, we try to get the level down below 140 decibels. The average gunshot comes in around 140-160.
Every decibel level multiplies the amount of decibels, so a 10 decibel level increase raises that amount by a factor of ten. The same goes in reverse. Reduce the decibel level by ten and you decrease the force of that sound wave by a factor of ten.
Think of sound as a wave and your ear drum as a house on the shore. If you have a 3 foot wave coming and you increase that power by a factor of ten, how big is the wave now? 30 feet! A three-foot wave won't likely damage your house, but a 30-footer means trouble - as in serious damage that you may never be able to repair. A suppressor is like a solid break wall that protecting your house (inner ear) from that wave. A suppressor mutes the sound wave, making it safer and more enjoyable to shoot.
Best .270 suppressors
We picked the cans in this list based on our experiences in the field and on feedback from customers.
BANISH Backcountry

The two most important factors for picking a suppressor for a backcountry hunt are sound suppression and weight, and the .30 caliber BANISH Backcountry suppressor was built with those factors in mind.
The Backcountry is a fixed-length suppressor that measures 5.5” in length (5.7” with QD mount) and weighs just 7.8 ounces. That’s a full 1.3” shorter and 2.2 ounces lighter than the BANISH 30 in its short configuration. That may not sound like much, but it makes a world of difference for backcountry adventurers who carefully pack their gear with size and weight in mind.
Rated for calibers up to the .300 Remington Ultra Magnum (RUM), the BANISH Backcountry utilizes six baffles that drop the decibel level down to 135 dB for .308 Winchester, 137 dB for .300 Win Mag, and 138 dB for .300 RUM at the ear – all of which fall below the hearing-safe threshold.
Utilizing a 1.375×24 Universal Mount, the BANISH Backcountry is a direct-thread suppressor designed to eliminate any extra weight associated with a muzzle device method of attachment, but it is also available with an optional muzzle brake attachment.
When size, weight, and sound suppression are of the utmost concern, the BANISH Backcountry suppressor allows you to pack in ounces, shoot at hearing-safe levels, and pack out pounds.
What customers say:
"It’s not my only can, just the favorite one. The Backcountry noticeably reduces sound while remaining light & short. The portability it affords is awesome. This suppressor is the perfect choice for hunting applications. Silencer Central makes it easy to own one." Jonathan P.
Features/Advantages:
- Quick-detach and direct thread options available
- User-serviceable
- Lightweight titanium construction
Disadvantages:
- It may be out of the budget for some people
Specs: BANISH Backcountry
- Caliber: Rimfire to .300RUM
- Weight: 7.8 oz
- Length: 5.5”
- Sound reduction: 35 dB
Price: $1,099
Dead Air Sandman-S

Dead Air's Sandman suppressors have great reputations and with good reason. The Sandman-S is the "little brother" to the Sandman-L, and while it may be smaller, it still retains all of the performance. Featuring a low blowback design, the Sandman-S is touted for not only its compact construction but also for its impressive noise reduction at the ear. That makes it a great option for a .270 Winchester suppressor.
The Dead Air Sandman-S features a quick-detach mounting system that incorporates an index pattern for ease of mounting and removal. It's also outfitted with a removable front-end cap, making the Sandman-S extremely user-serviceable, allowing for quick disassembly, cleaning, and fast reassembly.
What customers say:
"This thing is a whole different animal. Threw this on my .308 build and definitely a heavy robust monster. It’s compliments the build well as it big the handguard perfectly. Putting in 50rds after the install is night and day difference. Not much as to being hearing protection proof but definitely suppresses concussions and help taming the crack. Thanks Silencer Central!!" Jerry T.
Why We Like It:
- QD mounting system for easy on-off
- User-serviceable for easy cleaning
- Great sound reduction for the size
Specs:
- Weight: 17.7 oz
- Length: 6.8"
- Finish: Cerakote
- Materials: Stainless Steel and Stellite
Price: $999
Banish 30

The Banish 30 is a direct-thread suppressor that mounts on conventional 5/8x24 threads and comes out of the box as a 9" suppressor holding eight baffles.
If, however, you’ll be shooting suppressed in tighter, more confined spaces, or you just don't want as much can hanging off the end of your barrel, then you'll benefit greatly from this suppressor's modularity. It can easily break down and assemble into a 7" configuration with six baffles. Either way, you'll still get great sound suppression with minimal added length on your .270 Winchester rifle in either configuration.
Weight is just as important as the overall length in this situation. The Banish 30 is made from a strong titanium alloy for unmatched durability at an extremely lightweight. In the full configuration, it weighs 13 ounces; in the short configuration, it weighs just 10 ounces. You’ll be hard-pressed to even feel it on the average rifle chambered in .270 Winchester!
When it comes time for cleaning, the Banish 30 easily comes apart from both ends and is ready to be tossed in a tumbler, ultrasonic cleaner, or cleaned manually. Reassembly is a breeze due to the baffles being keyed and indexed for exact alignment.
What customers say:
"I love the versatility of this Suppressor. I put about 300 rounds through it with different weapons. Worked flawlessly. I will order several more of these in the future." John B.
Why We Like It:
- Modular design to fit specific needs
- User-serviceable for easy cleaning
- Titanium offers great strength with minimal weight
Specs:
- Weight: 10 oz or 13 oz
- Length: 7" or 9"
- Finish: GunKote and DLC
- Materials: Titanium
Price: $999
SilencerCo Omega 300

SilencerCo's Omega 300 is the lightest, shortest, quietest, full-auto-rated, titanium silencer in its category. If you like to have choices and options, it even comes complete with direct thread and fast-attach mounts, as well as a removable Anchor Brake to reduce recoil, which can be replaced with a flat front cap if you don't need the brake.
The Omega 300 is popular for all sorts of .30-caliber chamberings, as well as slightly smaller ones like the .270 Winchester. That makes it one of the best multi-caliber suppressors in its class, so it will be right at home on a variety of other rifles, too. You aren't just limited to the .270 Winchester, so try it out with .308, .30-06, .300 Blackout, etc.
What customers say:
"I purchased the Silencerco Omega 300 for its ability to make shooting less noisy. What I did not expect was how it really helped with recoil management and improved accuracy. The best I was able to achieve with my .308 rifle and ammo before was a 1,5 moa grouping. With the Silencerco Omega 300 added to the mix (same gun and ammo) I was able to quickly get my best grouping down to .75 moa! So, very happy with this purchase and what it has done for my shooting experience." Scott C.
Why We Like It:
- Multiple mounting options come with it
- Comes with a brake in the box
- Best in class specs in its category
Specs:
- Weight: 14.8 oz
- Length: 7"
- Finish: Black or FDE
- Materials: Cobalt, Inconel, Stainless Steel, and Titanium
Price: $915
Banish 30 Gold

An exceptionally versatile suppressor, the Banish 30 Gold is rated for calibers from rimfire up to 300 RUM, making it a great choice for a shooter using .270 Winchester cartridges. All Banish suppressors have been designed for unmatched sound suppression, and testing shows that the Banish 30 Gold reduces the report by 36 decibels. The average sound level heard by shooters from the Banish 30 Gold is 132.9 decibels!
Like all Banish suppressors, the Banish 30 Gold is made from a strong titanium alloy that results in unmatched durability at an extremely lightweight of just 13 ounces.
The Banish 30 Gold is an 8.2-inch quick detach suppressor holding 11 baffles. Completely user-serviceable, you can disassemble the suppressor for cleaning in a tumbler, ultrasonic cleaner, or by hand. When you’re ready to put it back together, the baffles are keyed and indexed for hassle-free reassembly.
Perfect for everything from a fun time at the range to big game hunting, the Banish 30 Gold will significantly reduce the report and recoil of large-caliber rifles (up to 45% in testing), while still being effective on rifles down to rimfire calibers.
Why We Like It:
- User-serviceable for easy cleaning
- Titanium offers great strength with minimal weight
Specs:
- Weight: 13 oz
- Length: 8.2"
- Finish: Cerakote
- Materials: Titanium
Price: $1,299
Hunting With a Suppressed .270
As we mentioned before, tens of thousands of people have trusted a rifle chambered in .270 Winchester for hunts of all kinds for almost a century. As long as you understand the game you're hunting and are confident in both your abilities and those of your chosen cartridge load, there's no reason you can't trust the .270 Winchester on your next hunt either.
Adding a suppressor into the mix is a gamechanger. The reduced decibel level will help protect your hearing and the hearing of the rest of your hunting party. Plus, there's less chance of spooking any other game that may be in the area.
While the recoil from a .270 isn't extreme, it's still nice to know that a "side effect" of using a suppressor is recoil reduction. That means you can expect a very accurate first shot with an easy time getting back on target if you need a follow-up shot.
Enjoy the Hunt, Shoot your .270 Win Suppressed
The market for suppressors is plentiful, and narrowing it down to the right one for you can be confusing. Thankfully, our staff has been shooting and selling suppressors for more than 15 years. Suffice it to say that we’ve got a pretty good handle on which silencers pair best with certain guns and calibers, like the .270 Winchester cartridge. If you’re having trouble deciding, don’t hesitate to reach out to us. We’ll happily talk you through the options and then, when you’re ready, get you on your way to silencer ownership and suppressed shooting!
related articles
The .270 Winchester, AKA .270 Win and .270, was introduced almost a century ago, but it has a following that is arguably larger than it was when it was first introduced. Many consider it to be the best deer hunting rifle of all time and there are elk, bear and other big game species hunters that would agree. Initially relegated …

Firearms
The Best Lever-Action Rifle Suppressors
If you hadn’t noticed, there is a big resurgence in lever-action rifles these days. These were the original “high capacity” firearms and there are more hitting the market all the time. There are some great models coming from folks at Henry, Marlin, Winchester, Browing, and even Smith & Wesson, with additional cool guns coming from Rossi, Mossberg, Chiappa, and Taylor to name a few. And quite a few are available from the factory with a threaded barrel for a suppressor. This begs the question, what are the best lever-action gun suppressors?
Calibers

Traditionally there are some specific calibers that are common amongst the lever-action rifle crowd. The popular ones like .30/30 and .45/70 make up the bulk of the available rifles, with others available in .357, .44 Mag, and .45 LC. But it’s not limited to just those calibers. Companies like Browning and Henry also produce rifles in popular rifle calibers like .308, .243, .223, and even 6.5 Creedmoor.
There are even a couple of companies working to release lever-action rifles that accept AR mags. Bond has the LVRB in the works, and Henry has the Lever Supreme. And, of course, we can’t forget the straight wall cartridges that have caused a huge amount of ruckus in the industry – the .350 Legend, .360 Buckhammer, and the .450 Bushmaster.
While these cartridges are all pretty stout, Browing has made BLR lever-action rifles in some big caliber offerings. You can grab anything from a .22-250 on up to a .300 Win Mag, or any of the Winchester short mag cartridges like 7mm WSM, .300WSM, and .325 WSM.
The point here is that there are many caliber options in a lever-action rifle. This makes picking the best suppressor for your lever gun a lot like picking one for any other rifle. But some do work better than others.
The Best Suppressors for Lever-Action
We didn’t just pick the cans we want to sell for this list. After all, we are the experts in the suppressor industry and sell more suppressors and accessories than any other company in the United States. We talked to our engineers about which cans work best, plus we did what we always do – we listened to our customers.
Best Overall – BANISH 46-V2

We didn’t pick this can just because it is our own brand. We picked it because we designed it to be the best. Period. Countless hours of testing and designing went into the latest version of our .46-caliber can and it works amazingly well on every rifle we’ve put one on.
If you are shooting a .45/70 or similar caliber, this is the can you need. It works great for anything from a .223 up, but really shines on the bigger caliber rifles. We tested it with a Henry X-Rifle in .45/70 and liked it so much that we paired the two for our Carnivore Camp Giveaway a while back. Made of titanium, the Banish 46-V2 is lightweight at just 15.3 oz. It is only 8 inches long and 1.59 inches in diameter, making it a very compact suppressor for big-caliber rifles and it is extremely tough for hunting in harsh conditions. The BANISH 46-V2 offers a 30-decibel reduction in sound output, too.
Specs:
- LENGTH - 8"
- DIAMETER - 1.59"
- NUMBER OF BAFFLES - 12
- WEIGHT - 15.3 OZ
- MATERIAL - TITANIUM & 17-4 STAINLESS STEEL BLAST BAFFLE
- SELF-SERVICE - YES
- CALIBER RANGE - 5.56 - .460
- SOUND REDUCTION - 30 DB
- MOUNT STYLE - DIRECT THREAD
- PRICE - $1,299
Best .30 caliber – BANISH 30

The BANISH 30 is our most popular silencer by far, and if you are looking for a can that will work on your .30/30, it's as good as you’ll get. Our internal testing shows that the BANISH 30 reduces the report of a .308 by a whopping 34 decibels at a minimum. And it’s a little more for the .30/30!
The BANISH 30 comes to you as a 9-inch suppressor that holds eight baffles. If you want to shorten it up, it can easily break down and assemble into a 7-inch can with six baffles. It’s a lightweight can, too. In the full configuration, it weighs 14 ounces and in the short configuration, it weighs just 11 ounces. You can even use it on your BLR, as it works with any .30 cal, up to .300 mag! Good stuff!
Specs:
- LENGTH - 7” OR 9” 1.5"
- NUMBER OF BAFFLES - 8
- WEIGHT - 11.2 OZ (7”) OR 14.3 OZ (9”)
- MATERIAL - TITANIUM
- SELF-SERVICE - YES
- CALIBER RANGE - .17 TO .300 WEATHERBY
- SOUND REDUCTION: - 34 DB
- MOUNT STYLE - DIRECT THREAD
- PRICE - $999
While Supplies Last – BANISH 46

We still have a few of the original .46 can, the BANISH 46. It is a great can, and still a popular option, and you can save a few bucks on one now, too. The BANISH 46 is a modular silencer designed for use with a wide assortment of rifle calibers including the mighty .45-70 Government as well as .44 mag and smaller caliber options.
Made of titanium and Inconel, the Banish 46 provides the ultimate combination of durability and weight reduction. The BANISH 46 weighs only 16.3 oz in the short configuration of 7.9”, and 20.4 oz in its 10” configuration. Testing has shown that the BANISH 46 offers excellent noise reduction, more than 34 decibels in its long configuration.
SPECS:
- LENGTH - 7.9" OR 10"
- DIAMETER - 1.73"
- NUMBER OF BAFFLES - 10
- WEIGHT - 16.3 OR 20.4 OZ
- MATERIAL - TITANIUM
- SELF-SERVICE - YES
- CALIBER RANGE - 5.56 - .460
- SOUND REDUCTION - 34.5 DB
- MOUNT STYLE - DIRECT THREAD
- PRICE - $1,099
Most Compact .30 - BANISH Backcountry

If you’re shooting anything from a .300 mag on down, including your .30/30, you have the option of running the BANISH Backcountry. Why go this route? That’s easy, most lever-action rifles are pretty compact, especially a .30/30. If you want to keep the advantage of having a fast-handling, short rifle, but still feel the need to take the bark from the barrel, the Backcountry makes a tone of sense due to its small size and light weight.
The Backcountry is a fixed-length suppressor that measures only 5.5 inches in length and weighs just 7.8 ounces. For comparison, it is a full 1.3” shorter and 2.2 ounces lighter than the Banish 30 in its shortest configuration. When you are trying to keep everything as compact as possible, we have a cool option for you in the Backcountry.
SPECS:
- LENGTH - 5.5"
- DIAMETER - 1.6"
- WEIGHT - 7.8 OZ
- MATERIAL - TITANIUM
- SELF-SERVICE - NO
- CALIBER RANGE - UP TO 300 RUM
- SOUND REDUCTION - 30 DB
- MOUNT STYLE - DIRECT THREAD UNIVERSAL HUB
- PRICE - $1,099
Other options?
Are there other options available? Yes and no. SilencerCo and a few other companies make excellent Lever-action rifle suppressors, like the SIlencerCo Hybrid 46M. The problem, and reason why – FOR NOW – they aren’t on this list is simple. They aren’t in stock. How frustrating would it be to read about a great can and decide you want one, only to find that it is out of stock? We wouldn’t do that to you. When we get inventory on some additional lever-action rifle suppressors, we will update this list.
It is actually one of the biggest advantages BANISH cans have – Inventory. Not only did we design them to be the best in their class, but we have control over manufacturing. It’s one of the pillars of the Silencer Central plan – Award winning customer service, to-your-door shipping, fast approval times, and in-stock inventory.
Lever-Action Suppression Issues
Like we said at the start, there are more and more lever-action rifles hitting the market that come with threaded barrels. That is good because with some lever guns, it can be tricky to complete threading. Can it be done? Sure. You might need a good gunsmith to disassemble your lever gun and get the barrel out.
There are some barrels that are a little easier. Henry’s Long Ranger series doesn’t have the magazine tube attached to the barrel, making them easier to work with. Browning’s break-down BLR rifles might be easier to work with, too.
Have barrel threading questions? We can help. Check with our expert barrel-threading team.

Why use a suppressor with a lever-action rifle?
There is a good reason to use a suppressor with any rifle, and the same can be said for lever-action rifles, too. When you look at the lengths of most lever guns, they tend to be shorter than most bolt-action rifles, and then you add in cartridges like the .45/70 and that’s a lot of bark to go with the big-bullet bite. Any time you can take the noise from a firearm being fired, that is a good thing.
Our extensive testing on a product, like our BANISH 46-V2, has shown us that it not only lowers the decibel levels to a safer amount, but also it makes the rifle more accurate and even helps with recoil. Anytime you can make a rifle more pleasant to shoot and make it more accurate, well, that ought to be enough to get you to buy one.
Why buy from Silencer Central?
We pride ourselves on being a customer-first business. After all, our founder and CEO, Brandon Maddox set out to build a company that makes it easier for people to get a suppressor. Here’s what we offer to you:
- Award-winning customer service with a new online portal that lets you track information on your silencer order and approval process any time.
- Expert support to get the right suppressor for you, get the right accessories to help you get the best fit and performance.
- Fast approvals – We have streamlined the process and work hand-in-hand with the ATF to help you get approved faster.
- Shipping to your door of your suppressor.
- Other services and after the sale support, including a terrific warranty.
Shop Silencer Central today to get started!
If you hadn’t noticed, there is a big resurgence in lever-action rifles these days. These were the original “high capacity” firearms and there are more hitting the market all the time. There are some great models coming from folks at Henry, Marlin, Winchester, Browing, and even Smith & Wesson, with additional cool guns coming from Rossi, Mossberg, Chiappa, and Taylor …

Firearms
Choosing the Best Jericho 941 Suppressor: Our Top Picks for 2024
The IWI Jericho 941 pistol is one that is easily identifiable. There isn’t anything that really looks, or performs like it. That it comes from the same company that produces the UZI helps, and it also lets you know that it is a solid pistol that will do exactly what you need it to do.
One thing that is definitely in the 941’s favor is how well it takes to a suppressor. Not every pistol will work seamlessly with a can, but we have found the Jerico to be one that does pretty well. Granted, you will need to find a threaded barrel for your Jerico if you don’t already have one. That may be the biggest challenge to fitting the best Jericho 941 suppressor.
Getting to Know the Jericho 941
Introduced in 1990 by IMI (now IWI), the Jericho 941 is a 9mm DA/SA pistol that is modeled on the CZ-75 and is sometimes known as the Baby Eagle. Despite that moniker, it is not related to the larger Desert Eagle.
The gun has been used by various police and military forces throughout the world, but it is most widely known and recognized as the gun used by one of the characters in the Japanese anime show Cowboy Bebop.
While you can certainly use a suppressor with the Jericho 941, it's important to understand that there are no options available from the factory with a threaded barrel. If you want to use a suppressor, you'll have to purchase an aftermarket threaded barrel. That's the rub about suppressing one of these pistols. Aftermarket threaded barrels are few and far between. If there were an easy solution, we'd include a link, but there isn't that we've found. We do, however, know that they exist, so if you find one, grab it while you can.
Benefits of Suppressing a 9mm
The 9mm cartridge is one of the most popular in the world, which means that there are a ton of guns chambered for it and, by extension, a ton of suppressor options available for it.
Since it is so popular, suppressor development for the 9mm is pretty well honed in and the cartridge benefits greatly from being suppressed.
While no one would argue that the 9mm produces much recoil, it still has recoil nonetheless. Shooting it with a suppressor helps reduce some of that recoil. This reduction makes it more pleasant to shoot, can help increase a shooter's accuracy, and can help get the shooter back on target faster if there is a need for a follow-up shot or shots.
Choosing the Best Jericho 941 Suppressor
Every person's priorities for choosing a suppressor are different, whether it's for use with a Jericho 941 or some other gun.
Decibel reduction, recoil management, length, weight, versatility, build materials, budget, and more are some of the most common aspects that people take into consideration when choosing the best suppressor for their needs.
Our Top Suppressor Picks for the Jericho 941
Below you will find detailed information on our top suppressor picks for the Jericho 941. We chose the products based on price, weight, length, versatility, decibel reduction, and popularity of the models that we sell - and we sell a lot of suppressors.
Best Overall: Dead Air Wolfman

The Wolfman from Dead Air takes our top spot for the best Jericho 941 suppressor because of its range in terms of modularity, caliber compatibility, firearm compatibility, and build quality.
Made of fully welded 17-4 PH stainless steel, this provides ultimate levels of strength and durability while still keeping the suppressor as light as possible: only 9.8 ounces in the short configuration and just 14.4 ounces in the long configuration. It’s the perfect balance of toughness and lightweight. The Wolfman's large internal volume and blast chamber is designed for maximum muzzle suppression while also maximizing at-ear performance.
Even though the Wolfman already offers excellent decibel reduction right out of the box, the front cap can contain a user-provided rubber wipe that can drop sound suppression levels even further.
Advantages:
- Fully welded stainless steel construction is very durable
- Modular design for user-specific needs and setups
- Rubber wipes can be added to the front cap for extra sound reduction
Drawbacks:
- Not user-serviceable
Dead Air Wolfman Specs:
- Caliber: 9mm
- Weight: 9.8 oz or 14.4 oz
- Diameter: 1.618"
- Length: 5.13" or 7.5"
- Mount Type: Direct Thread
- Material: Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Yes
Price: $899
Most Affordable: Yankee Hill Machine R9

Affordable and cheap are not synonyms, so don't mistake the two words to mean the same thing, and don't mistake the Yankee Hill Machine R9 as being cheap just because it is affordable. Even after you factor in the $200 tax stamp, this suppressor still costs $320 less than the next least expensive suppressor on this list - before you add the stamp!
If you’re the kind of shooter who likes to run high volume quantities of ammo through handguns, SBRs, subguns, or pistol caliber carbines, then the R9 is exactly what you need. It’s even rated for limited full-auto fire, so go ahead and send it! The fully-welded, tubeless design is built from stainless steel for rugged durability while still keeping the weight down: it weighs just 10.7 ounces.
Even though it's a 9mm suppressor, the R9 is compatible with a bunch of different calibers: 17HMR to 9mm for pistols, as well as 5.56 NATO, .300BLK, .350 Legend, 6.5 Grendel, and .308 Winchester for rifles. Simply put, there’s a ton of value packed into this suppressor.
The R9 is compatible with the YHM Phantom QD adapter, 3-lug adapter, Nielson adapter, and other direct thread sizes.
Advantages:
- Short, lightweight, and affordable
- Welded tubeless design is really durable
- Lots of caliber compatibility for use with other guns
Drawbacks:
- Not modular in length
Yankee Hill Machine R9 Specs:
- Caliber: 9mm
- Weight: 10.7 oz
- Diameter: 1.562"
- Length: 5.2"
- Mount Type: Direct Thread
- Material: Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Limited
Price: $579.95
Most Versatile: SilencerCo Omega 36M

For the shooter who wants modular capabilities and multi-caliber compatibility because you'll be using it on more than just your Jericho 941, the SilencerCo Omega 36M fits the bill perfectly and easily slides into our spot for versatility on this list.
Offering multiple configurations for length, weight, and mounting options, the Omega 36M has a two-piece modular design that allows for the removal of the front section. This lets the shooter decide what is more important during a specific shooting scenario: if you need the best sound suppression and are not worried about length, then run it full-size. If you can sacrifice a few decibels in the name of size, then go with the shorter configuration.
Here are the details of the Omega 36M configurations: When shortened, it measures 4.90” and weighs just 9.8 ounces. The long configuration is 6.85” and weighs 12.5 ounces. By utilizing a mixture of stainless steel, titanium, and Cobalt 6, both long and short configurations of the Omega 36M are full-auto rated.
Like most SilencerCo products, the Omega 36M can be used with a variety of other SilencerCo pistons, Charlie, ASR, and 3-Lug accessories.
Advantages:
- Modular, multi-caliber design without having to be huge in size
- Build quality allows it to be full-auto rated even in the 4.90" configuration
- Can use entire SilencerCo family of mounting products
Drawbacks:
- Lots of versatility, but no large rifle compatibility
SilencerCo Omega 36M Specs:
- Caliber: .360
- Weight: 9.8 oz or 12.5 oz
- Diameter: 1.57"
- Length: 4.9" or 6.85"
- Mount Type: ASR Mount
- Material: Cobalt, Titanium, and Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Yes
Price: $1,169
Lightest: Dead Air Odessa 9

The Jericho 941 isn't exactly the smallest or lightest handgun around, so if you can save some weight with your suppressor, that's a big plus. Due to its compact size – ranging from a tiny 2.75” to just 7.75” and weighing just 7.4 ounces in its full length – you won't feel like you've got a giant metal pipe on the end of your muzzle. As a result, the Odessa 9 takes the spot as the lightest on our list: even in its full-size configuration, it still weighs less than all the others at their shortest by more than two ounces!
There are ten different configurable lengths for the Odessa 9, which is great because you can truly dial it in and get the best balance between size and sound suppression on the Jericho 941 or any other gun you use it on.
- Lightest and shortest on the list by far
- More modular capabilities than any other on the list
- Competitively priced
Drawbacks:
- Direct thread attachment option only
Dead Air Odessa 9 Specs:
- Caliber: 9mm
- Weight: 7.4 oz (full length)
- Diameter: 1.1"
- Length: 2.75" to 7.75"
- Mount Type: Direct Thread
- Material: Stainless Steel
- User-Serviceable: Yes
- Full-Auto Rated: No
Price: $899
Best BANISH: BANISH 45

We've got a lot of options in the BANISH lineup, but the BANISH 45 is a modular silencer specifically designed for handguns in calibers ranging from .45 ACP down to rimfire. Testing shows the BANISH 45 suppresses a 9mm pistol (like the Jericho 941) by 36 decibels. That's best-in-class sound suppression!
Both ends of the BANISH 45 can be easily unscrewed, allowing you easily and quickly disassemble it to change between the short and long configurations as well as making cleaning a breeze. Reassembly after cleaning or putting it back into the long configuration is just as easy as disassembly thanks to the keyed and indexed baffles.
Caliber compatibility and the ability to use it on other firearms is what we love best about the BANISH 45. Easily swap out the pistons and you can attach this suppressor to a number of pistols or pistol caliber carbines.
Advantages:
- Compatible with all of the common pistol calibers
- Titanium makes it strong and still very light
- Modular so that you can choose which size is best
Drawbacks:
- Swapping pistons adds to the versatility, but each one is sold separately
BANISH 45 Specs:
- Caliber: .45
- Weight: 9.6 oz or 11 oz
- Diameter: 1 3/8"
- Length: 6.7" or 7.6"
- Mount Type: Direct Thread
- Material: Titanium and Aluminum
- User-Serviceable: Yes
- Full-Auto Rated: Yes
Price: $949
What to Know When Buying a Suppressor
First and foremost, yes, suppressors are 100% legal to own, but there are some special considerations.
In broad legal terms dealing with federal laws, if you're able to own a gun, then you're able to own a suppressor. However, suppressors are not legal in all 50 states. In fact, they're only legal in 42 states and you can only hunt with them in 41 of those 42. There are also some local restrictions on use and ownership within some states. As a result, you need to do your due diligence to ensure that suppressor use and ownership is legal where you live.
Suppressors are NFA Items
Suppressors are known as NFA items because they fall under regulations set out in the National Firearms Act of 1934, or NFA for short. Other things that are classified as NFA items are destructive devices, short barrel rifles, short barrel shotguns, and machine guns. It may seem silly to lump suppressors in with those other items, but that's just how the current guns laws are and have been for almost a century in the United States. The NFA dictates that you must purchase a $200 tax stamp for each and every suppressor you buy.
You Can Set Up a Free NFA Gun Trust
An NFA Gun Trust allows you to add unlimited co-trustees to also use your silencers or other NFA items, ensures easy transfer of items as an inheritance when you die, and makes purchasing more silencers and other NFA items easier in the future. We offer this Gun Trust FREE if you purchase a silencer from Silencer Central. We also help ensure you completed the gun trust correctly so ATF does not reject. We have completed over 15,000 silencer-to-gun trust transfers and counting!
You're Not Alone in the Buying Process
At Silencer Central, we're with you every step of the way in the buying process. We can help you pick out the right suppressor for your needs, we'll complete all the paperwork for you over the phone and online, set you up on an interest-free payment plan, create your free NFA Gun Trust, thread any barrels that you need for your new suppressor host guns, and we'll even mail your suppressor right to your front door once it has been approved.
Elevate Your Shooting Experience – Shop Silencer Central!
At Silencer Central, we've perfected the suppressor buying process over the course of almost 20 years. We're the nation's largest silencer dealer and the only one that's licensed to sell to people in all 42 states where suppressors are legal. Plus, we'll ship it right to your front door once it has been approved.
You can't afford to not have a suppressor any longer, so let's get your journey to suppressor ownership started today so that you can start shooting your Jericho 941 suppressed!
Firearms

How Silencer Central Pioneered Ship-To-Your-Front-Door Service
March 11, 2025
The Silence of the Hunters – A Hearing Protection Perspective
March 6, 2025
NFA Wait Times: Complete Guide 2025
March 1, 2025
Sportsman’s Warehouse Now Offering Online Suppressor Sales, Delivered by Silencer Central
March 12, 2025The IWI Jericho 941 pistol is one that is easily identifiable. There isn’t anything that really looks, or performs like it. That it comes from the same company that produces the UZI helps, and it also lets you know that it is a solid pistol that will do exactly what you need it to do. One thing that is definitely …
FREQUENTLY ASKED QUESTIONS
At Silencer Central, we’re only interested in providing you with actionable knowledge about gun silencers, how to select the right suppressor for your needs, and more. Check out our most frequently asked questions below to learn more or contact us with specific questions.
gENERAL
eFORMS
General
Order Status
Shipping
Payment
Barrel Treading
Company Info
Silencers
When it comes to the government – and especially the ATF – one can never know for sure. Presently, we don’t know how much faster it will be. With that said, our research based on previous electronic Form 4 approvals and the current electronic Form 1 approvals suggests that once this process gets rolling, the total time needed to secure a transfer approval of a silencer should be reduced from the current 10 months (or more) wait time, to an approximate 150 days.
The biggest change for the customer will be to acquire your username and PIN from the ATF. To create an eForms account, visit eforms.atf.gov to start the process. You will then receive your username from the ATF (they pick it, you do not) and choose a password and PIN (you pick it, they do not).
You will still provide us all of your personal information, your fingerprints and your photo. The biggest change is on Silencer Central’s side as we will now submit all of your information electronically through the eForms website AND your wait time will significantly decrease.
The ATF’s new electronic version of the Form 4 will greatly expedite the time required to make these transfers. When a transfer applicant or dealer enters the data electronically, the data will now be transmitted digitally. This cuts out the repetitive need for data entry and validation.
Electronic Form 4 submissions should arrive at the ATF instantaneously, ready for the approval process. All of the time needed for data entry will be cut from the processing time.
Yes, you can add any silencer to a trust after you buy it by filing as an individual. Just keep in mind a few things. You will need to have legal help is setting up the new trust and adding in the silencer. There will likely be fees involved, but we can’t predict what those will be. There is also the issue of a tax stamp. If you transfer your silencer to a trust, you will need to buy a new tax stamp for it under the trust, according to the ATF.
The short answer is yes, you likely will – for now. Approval times for trusts are speeding up, and batch approvals are happening, too. We have been working with the ATF to help make the process for trusts faster, but individual approvals are currently faster.
Yes, all of our processes are ready and in-place. Not only have we been very involved with the ATF in beta testing for this NEW ATF eForm 4 process, but Silencer Central was also one of the primary companies invited to the final testing and feedback session for eForms.
1. If you have already started your application through the paper-process, then you will need to stay on that path. It is not recommended to withdraw paper applications. Remember: you’re already in line, so why jump out and go to the back of a different one?
2. ATF has stated that any withdrawals of pending paper applications will result in a one-year delay.
Our interest free eZ-Pay plan is extremely popular at Silencer Central. We will continue to allow you to “pay for it while you wait for it.” If you are approved before your payment plan is complete, simply pay off your balance and have your silencer shipped directly to your door.
If you have already started your application through the paper-process, then you will need to stay on that path. It is not recommended to withdraw paper applications.
The paper version will still be an option. If for any reason you decide you would rather submit on paper, you certainly can, and Silencer Central can still do that on your behalf as we have been doing for years. The wait time will remain similar to what it is currently.
ATF electronic Form 4’s will change the Form 4 from a paper process to an entirely digital process. Silencer Central will submit everything to the ATF digitally and the ATF will send their approval digitally. This will speed up the process of buying and waiting for approval.
The most important change that the ATF has made is the usage and creation of a PIN that will help submit your form digitally. This process will be similar to the pins that have been used for years with ATF Forms 1, 2, 3, 4, 5, and 6.
To create an eForms account, visit eforms.atf.gov to start the process. You will then receive your username from the ATF (they pick it, you do not) and choose a password and PIN (you pick it, they do not).
There are two logical answers to this question. The first is the time it takes for paperwork to make it through the mail, and with postal reliability these days, there’s no telling when your paperwork may actually arrive. Thankfully, that’s now a thing of the past!
The second reason is the amount of time devoted to data entry. When a silencer dealer or individual sends completed paperwork to the ATF to secure permission for a Form 4 transfer, employees at the ATF have to manually enter the data from the forms. (Yes, that’s right: the ATF takes your paper form and enters it into a computer instead of just having you enter it electronically in the first place.)
As you can imagine, this is a time-consuming process. The data must be entered, and then checked, and this process is typically taking upwards of 9 months as of the time of writing.
The real answer to this is that it is entirely up to you. Only you can decide what works best for your circumstances. It’s pretty obvious that we tend to prefer trusts for the flexibility they provide. That’s why we offer trust setup as a free service. However, we also see the benefit to individual filing, as you will likely get your silencer faster. Go through all the pros and cons to each and just know that we’re here to help you regardless of what you choose.
Yes, we anticipate a significant decrease in wait times once the ATF eForm 4 is launched.
That is the goal that we and the ATF are working toward. We are always looking at how we can optimize our process, and we work with the ATF to see what can be done better. The ATF has told us that they are adding more staff and are working toward having the approval process be as close to equal as possible. But it isn’t there yet. We will keep everyone informed.
The eForms process only enhances Silencer Central’s process. We will still have the ability to mail your silencer directly to you. The variances we have with the ATF have allowed us to run most of our processes digitally so the only piece that is changing is we will now submit your application electronically to the ATF.
Silencer Background
The real answer to this is that it is entirely up to you. Only you can decide what works best for your circumstances. It’s pretty obvious that we tend to prefer trusts for the flexibility they provide. That’s why we offer trust setup as a free service. However, we also see the benefit to individual filing, as you will likely get your silencer faster. Go through all the pros and cons to each and just know that we’re here to help you regardless of what you choose.
Until recently, most Americans thought silencers were illegal. There are many benefits: better hunting, no hearing protection, reduced recoil, better accuracy, and happy neighbors. This market segment is the fastest growing in the firearms industry; we have been in this market exclusively since 2005.
There are countless benefits of owning a silencer, a few of which include:
1. Better Experience – Game is less likely to spook while hunting.
2. Reduces Recoil – Significantly reduces recoil when you shoot.
3. Increased Accuracy – Because of recoil reduction.
4. Less Noise – Means you won’t disrupt neighbors, family or pets.
5. Great for Family – Added safety for even the youngest family members.
Through our over 12 years of experience in the silencer marketplace, we’ve found customers have three main issues driving their purchasing decisions:
1. Best sound reduction
2. Best value for the price; and
3. Lightest weight for shooting convenience
Due to customer demand for these three types of silencers, we carry a large volume in each category. Of course, we’re also here to provide any other silencer you may want. As such, we can order any manufacturer’s silencer to ensure you have everything you need.
When you’re browsing your options, please note that a higher price doesn’t automatically mean that a silencer will be quieter. Large manufacturers commonly compromise value to mass produce in large volumes and turn larger profits (meaning you’ll pay more for less quality). As always, you can contact our staff between 8:30 a.m. and 5 p.m. during the week and after hours via email to assist with the purchasing process if you aren’t sure which silencer is right for you. Please tap into our experience and expertise.
At Silencer Central, we sell only the best, so we test with only the best. Currently, we test each of our silencers with a Bruel & Kjaer 2209 military grade sound testing meter that meets all military standards for silencer testing.
As the only silencer dealer in the country with this testing meter and one of only a few manufacturers with it, we can guarantee the quality of our products due to our rigorous testing process. We don’t carry any silencers that don’t meet our strict criteria and as such, you can purchase any of our products with confidence.
The only silencer as quiet in real life as it appears in movies is the .22 rimfire. All other calibers will sound like a .22 short to a .22 long when suppressed. However, every silencer we sell is hearing safe, meaning you won’t need additional hearing protection. See the silencer sound chart by caliber.
Silencer Ownership & Legality
No, when you purchase your next suppressor you will still need to complete the ATF application process, pay the $200 tax stamp, and wait for approval. However, Silencer Central keeps your fingerprints and passport-style photo on file in a secured location making the preparation of your application on future purchases fast and simple.
Yes, you can add any silencer to a trust after you buy it by filing as an individual. Just keep in mind a few things. You will need to have legal help is setting up the new trust and adding in the silencer. There will likely be fees involved, but we can’t predict what those will be. There is also the issue of a tax stamp. If you transfer your silencer to a trust, you will need to buy a new tax stamp for it under the trust, according to the ATF.
The real answer to this is that it is entirely up to you. Only you can decide what works best for your circumstances. It’s pretty obvious that we tend to prefer trusts for the flexibility they provide. That’s why we offer trust setup as a free service. However, we also see the benefit to individual filing, as you will likely get your silencer faster. Go through all the pros and cons to each and just know that we’re here to help you regardless of what you choose.
That is the goal that we and the ATF are working toward. We are always looking at how we can optimize our process, and we work with the ATF to see what can be done better. The ATF has told us that they are adding more staff and are working toward having the approval process be as close to equal as possible. But it isn’t there yet. We will keep everyone informed.
Silencer Central provides a FREE NFA Trust with the purchase of each silencer.
- NFA trusts allow sharing ownership of silencers with others.
- Trusts ensure the next generation inherits your suppressor.
- We have done over 15,000 gun trust silencer transfers and counting!
- We keep on file for future purchases.
The gun trust is 20 plus pages and allows you to add unlimited co-trustees to also use your silencers or other NFA items. We offer this Gun Trust FREE if you purchase a silencer from Silencer Central. We also help ensure you completed the gun trust correctly so ATF does not reject. We have completed over 15,000 silencer to gun trust transfers and counting!
You can hunt all game animals with a silencer in the the following states: Alabama, Arizona, Colorado, Florida, Georgia, Iowa, Kansas, Michigan, Minnesota, Montana, Nebraska, North Carolina, North Dakota, South Dakota, Tennessee, Texas, Wisconsin and Wyoming.
See Suppressor Laws for other states.
Yes. Buy one silencer and you can use it on all guns of smaller caliber. For example, if you bought the Banish 30 Multi-Caliber Suppressor, it will work with all of your rifle calibers from .17 to .30 caliber magnums
Currently, we’re licensed to sell directly to residents in all 42 states where silencers are legal, including Alabama, Alaska, Arizona, Arkansas, Colorado, Connecticut, Florida, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, New Hampshire, New Mexico, Nevada, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming.
For most customers, we’re able to mail the approved silencer and all forms directly to you, meaning you’ll never have to visit a physical location. This enables us to sell to customers across the country, no matter their zip code!
Yes! Doing so is very common with a stacked baffle design, like the BANISH 30.
Having one silencer for all rifle applications doesn’t often impact performance because .308 silencers are longer with additional baffles. Due to its light weight, titanium is one of the most popular materials for application on all sub calibers. Please note that not all .308 silencers work well on a .223. Stack baffle design is typically best for dual application because there is a greater surface area to remove heat from the blast.
In recent tests, we found that our own exclusive silencer, the BANISH 30, was quieter on a .223 than a .223 silencer was. Additionally, we have tested some silencers that are not hearing safe on all sub-calibers. As such, it’s best to ask our staff if you have a specific question about certain models.
Silencer buying process
Once we have received your approval, there are a few final steps before we can ship your silencer purchase to your front door:
1. You will receive an email with instructions on how to complete the required Form 4473. Once the form is completed, we’ll send you a signature request to review and digitally sign.
2. We are required to notify your local law enforcement agency that we are shipping your silencer(s) to you. We must wait 7 days after confirmed delivery of this notification before we can ship to you.
3. You will receive a shipping notification with tracking information once we prepare your order to ship. Please note: tracking may not be live for 1-3 business days. Adult signature is required at the time of delivery. Learn more about shipping.
In-store pick-up at our showroom in Sioux Falls is also available to South Dakota residents. For more information, call 866-891-4494.
Your ATF Form 4 application must include a passport style photo. Here are some tips to take the best picture.
1. The image will be cropped to a 2″x2″ square size.
2. The photo should be taken in front of a solid white background.
3. Photos must be taken in full face view. The top of your head and your shoulders need to be in full view (there should be white space above your head).
4. Remove any head coverings that would obscure your hair or hairline, including sunglasses, hats, toupees.
Submit your photo via the customer portal.
The short answer is yes, you likely will – for now. Approval times for trusts are speeding up, and batch approvals are happening, too. We have been working with the ATF to help make the process for trusts faster, but individual approvals are currently faster.
The real answer to this is that it is entirely up to you. Only you can decide what works best for your circumstances. It’s pretty obvious that we tend to prefer trusts for the flexibility they provide. That’s why we offer trust setup as a free service. However, we also see the benefit to individual filing, as you will likely get your silencer faster. Go through all the pros and cons to each and just know that we’re here to help you regardless of what you choose.
Buying a silencer can be an intimidating task. Dealing with the government and their seemingly constantly changing laws is enough to discourage even the most savvy shooting enthusiast. Silencer Central makes it simple to own a silencer. We do all the work for you and make it as easy as 1-2-3.
1. Select your silencer – We offer the best brands and can help you choose the silencer that’s right for you.
2. We do the paperwork – We will manage the entire buying process for you, let you pay for your silencer in installments and even set up a free NFA Gun Trust that allows others to use your silencer.
3. Direct-to-your-door shipping – Once approved, we will ship you new silencer directly to your door.
At Silencer Central (formerly Dakota Silencer), we offer a Gun Trust free for all our customers. In fact, 99.5% of our customers choose to purchase their Class 3 firearms through a Gun Trust.
Through a Gun Trust, you can create a “joint ownership” scenario in which you can legally share your silencer. You can also select who will inherit. Because we have a full-time staff to assist with your paperwork, we ensure the ATF won’t reject your paperwork. To discuss further benefits of a Gun Trust, contact a member of our team at 866-891-4494.
No! The best way to think of a silencer purchase is as a “title” transfer between our company and your Gun Trust or to you directly. While ATF must approve this transfer (which we will assist with), you do not physically need your own license to make a purchase.
There is a $200 Tax Stamp required per silencer. This fee is tax deductible and is a one-time fee. The best way to conceptualize this fee is as a title transfer tax.
Absolutely! While we stock only the most extensively tested and approved silencers, we can easily acquire a silencer from a manufacturer we don’t typically carry on our site.
Order Status
The real answer to this is that it is entirely up to you. Only you can decide what works best for your circumstances. It’s pretty obvious that we tend to prefer trusts for the flexibility they provide. That’s why we offer trust setup as a free service. However, we also see the benefit to individual filing, as you will likely get your silencer faster. Go through all the pros and cons to each and just know that we’re here to help you regardless of what you choose.
One of the most significant benefits of working with Silencer Central is that we manage your entire buying process and submit your paperwork quickly so the ATF can begin the approval process. Of course, the time for ATF approval following our processing may fluctuate depending upon demand placed on the ATF. Visit NFA-Status to see how fast approvals are arriving.
While we make every effort to fulfill your entire order, on rare occasion we may need to cancel one or more item(s). If we are unable to fulfill your entire order due to merchandise out of stock, you will receive a cancellation e-mail and will not be charged for unshipped item(s).
Shipping
Once we have received your approval, there are a few final steps before we can ship your silencer purchase to your front door:
1. You will receive an email with instructions on how to complete the required Form 4473. Once the form is completed, we’ll send you a signature request to review and digitally sign.
2. We are required to notify your local law enforcement agency that we are shipping your silencer(s) to you. We must wait 7 days after confirmed delivery of this notification before we can ship to you.
3. You will receive a shipping notification with tracking information once we prepare your order to ship. Please note: tracking may not be live for 1-3 business days. Adult signature is required at the time of delivery. Learn more about shipping.
In-store pick-up at our showroom in Sioux Falls is also available to South Dakota residents. For more information, call 866-891-4494.
Your silencer is shipped to your front door as soon as all federal requirements have been met. Once your order leaves our licensed location in your state, it is delivered to you within 3-5 business days. Please note: adult signature is required at delivery.
Learn how we mail your silencer here: Silencer Shipping: How We Mail Your Silencer.
Absolutely! When entering your billing address be sure to select to ship to a different address. Silencer Central only ships to the contiguous United States. There may be additional charges for shipping to Alaska. Please contact us if you have any questions.
Silencer Central orders are shipped from each of our licensed locations throughout the United States. An adult signature is required at the time of delivery.
At this time, Silencer Central only ships to the contiguous United States. There may be additional charges for shipping to Hawaii and Alaska. Please contact us if you have any questions.
payment
Payment (General)
Currently, we accept Silencer Central Gift Cards, Visa, MasterCard, American Express, and Discover payment options. Gift cards that display the Visa, MasterCard, American Express and Discover logos are also accepted.
All prices and amounts are in U.S. dollars.
Current law allows us to collect sales or other applicable state taxes, based on the order’s “ship to” address. Silencer Central follows the guidelines for each state as they pertain to your order. Most states assess sales tax on shipping and handling charges. All applicable taxes will be clearly displayed on the invoice that accompanies your order. If you have questions about the taxes on your order, please call us at 866.891.4494.
Note: State sales and other tax rates are subject to change at any time.
If you are interested in purchasing a Silencer Central gift card, click here. Gift cards are available online in the following denominations: $100, $250, $500, $750, and $1,000. Gift cards never expire.
Payment (ez-pay)
Our interest free eZ-Pay plan is extremely popular at Silencer Central. We will continue to allow you to “pay for it while you wait for it.” If you are approved before your payment plan is complete, simply pay off your balance and have your silencer shipped directly to your door.
The application process will begin immediately after you complete your purchase. Once we have your fingerprints, passport-style photo, and completed application, we will submit it to the ATF.
Yes, all silencer purchases qualify for a free NFA Gun Trust generated by Silencer Central, individualized and specific to your state.
No, we offer four interest-free, eZ-Pay payments. No fees ever.
Other companies are charging over 15% in fees for this type of payment plan. We buy in large volumes directly from the manufacturer, which eliminates the middleman, allowing us to provide this payment plan to you at no additional cost.
Yes! You will even find a couple SBR’s on our website available with the eZ-Pay option. Our website will always note which products are eligible.
The eZ-Pay Plan was designed for customers in our licensed states (Alabama, Alaska, Arizona, Arkansas, Colorado, Connecticut, Florida, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Mexico, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming.) who are filing a Form 4 transfer, which typically takes 12 months for ATF approval.
All customers are welcome to use the eZ-Pay Plan, but please keep in mind that the we do not ship eZ-Pay Plan orders until the order is paid in full. Form 3 transfers (dealer to dealer) are significantly shorter than in-state Form 4 transfers, so your order must be paid in full prior to shipment to your local dealer. Most Non- FFL residents who consider using eZ-Pay Plan elect to pay in full upon Form 3 approval to their local dealer or shortly thereafter.
After your initial down payment you will make three equal payments over the next 90 days (one payment due each month) to pay off your eZ-Pay Plan balance. You will receive an email 5 days prior to your next payment, reminding you that you have a payment coming out.
If you used a credit card for the initial down payment, our system will set up recurring payments automatically. You will receive an invoice via email five days before your payment is due. Recurring payments will be made by credit card; however, you can choose to make a payment by cash or check at least 14 days prior to your monthly recurring payment date.
Yes. You can pay your entire balance at any time during the 90-day period without incurring any penalty.
You will have three equal payments due on the same day each month. If you fail to make any of your monthly payments, your order will be cancelled and all products will be returned to stock. If eZ-Pay Plan products are returned to stock for delinquency of payment, all money you have paid towards your eZ-Pay Plan balance is non-refundable.
If for any reason you change your mind after purchasing and wish to cancel your order, you will receive your full cost of purchase back, including your tax stamp, less a 25 percent processing fee which will be issued in the form of a credit to be applied to a future purchase within one calendar year of cancellation. Please note: If you cancel prior to paying your eZ-Pay Plan in full, refunds from cancellations are based on full cost of purchase–not by percentage of what has been paid to date. Cancellation must be within 30 days of purchase and before any ATF paperwork has been submitted for the item. Unfortunately, once application forms have been submitted to the ATF, we are unable to cancel your order. Purchase of all sale items is final and no cancellation or refund can be issued. See more details about our guarantee, warranty, and cancellation policy.
No. Since your paperwork is specific to you, your trust, or your local dealer, once submitted to the ATF, no changes can be made. Once your purchase has been paid in full and you have received approval from the ATF, you can transfer your silencer to another person, however they will incur an additional $200 fee for another tax stamp and will be subject to current ATF wait times.
barrel threading
shipping
- Cut and Recrown – $69.99
- Recrown Only- $39.99
- Move Or Install Front Sight – $44.99
- Check Thread/Alignment – $24.99
All additional gunsmithing services can be added to your Barrel Threading order
We will send you a pre-packaged box (4″ x 8″ x 48″) containing two soft cases with a prepaid return shipping label. You will remove all accessories from your rifle and package your barrel(s) in the provided soft cases, fill out the order form and secure it in the soft case, then use the prepaid label to send it off to Silencer Central.
- Purchase the 360 Mailing Program with your order
- Drop off your barrels at our in-store location
*Please note, items must be unloaded, ensure there is no round in the chamber and that the magazine or tube is empty before shipping or dropping off with us.
*Silencer Central can not accept firearms that do not have a visible serial number unless documentation is included. If we receive a firearm with no visible serial number & lacking documentation, the item will be turned over to the ATF.
* Silencer Central Uses 4″x8″x48″ boxes, please ensure your riffle/barrel will fit into the container for return shipping. Silencer Central will not accept odd-shaped cases such as guitar cases or oversized gun cases.
Items dropped off at our Sioux Falls, SD location may be picked up in the store or shipped to you for $19.99.
If your barrel was shipped with a 360 Mailing Program, orders will be shipped to you when the work is completed.
company info
We are headquartered in Sioux Falls, South Dakota. Read about our story.
Silencer Central is headquartered in Sioux Falls, South Dakota. We have satellite locations and are licensed to sell silencers in all 42 states where silencers are legal, which allow us to deliver your new silencer directly to front your door. States include: Alabama, Alaska, Arizona, Arkansas, Colorado, Connecticut, Florida, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, New Hampshire, New Mexico, Nevada, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming.
Ten reasons to buy your silencer from Silencer Central!
1. Select your silencer – We were the first silencer reseller and have been making silencer buying super simple since 2005!.
2. Silencers are all we do – We are not a gun shop that sells silencers on the side like virtually everyone else.
3. Talk to an expert – We have a full-time staff dedicated to making sure your silencer buying experience goes without a hitch. And, if there is ever an issue, you’ll always be able to talk directly to a silencer buying expert.
4. Direct-to-your-door shipping – We have satellite locations in all 42 states where silencers are legal which allow us to deliver your new silencer directly to your door. States include: AL, AK, AZ, AR, CO, CT, FL, GA, IA, ID, KS, KY, LA, MD, ME, MI, MN, MO, MS, MT, ND, NE, NH, NM, NV, NC, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV, & WY.
5. Free NFA Gun Trust – We offer a free NFA Gun Trust (a $250 value) to all customers which essentially establishes a joint ownership scenario in which you can legally share your silencer with designated others (as well as determining who will inherit your silencer). This lets others use your silencer.
6. Pay just 25% down – Our eZ-Pay Interest-Free Layaway Plan allows you to “pay for it while you wait for it”. Submitting your down payment of 25% allows us to file your transfer paperwork with the ATF while you pay off your balance over three months. And we do not charge you any interest!
7. Barrel threading – In the event you need you rifle barrel threaded to accept your new silencer, we will take care of that as well through our Threading Central.
8. We know the game – We are the only silencer reseller on the ATF advisory board which means we not only know the rules and the ropes but we influence them as well.
9. Security – We know you are entrusting us with sensitive information and we are set up to protect it better than any gun shop. We also keep your trust and fingerprint records on file which allows you to streamline the process if you ever choose to buy another silencer.
10. Shopping protection – Finally, buy from Silencer Central and you automatically get the Norton Shopping Guarantee which gives you identity theft protection, dispute resolution, and a lowest price guarantee. All for free.
Yes, we used to be known as Dakota Silencer! On August 1, 2019, Dakota Silencer rebranded as Silencer Central. This name change reflects growth outside of our midwest roots and the expansion to conduct business in all 42 silencer legal states.
Currently, we’re licensed to sell directly to residents in all 42 states where silencers are legal, including Alabama, Alaska, Arizona, Arkansas, Colorado, Connecticut, Florida, Georgia, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, New Hampshire, New Mexico, Nevada, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming.
For most customers, we’re able to mail the approved silencer and all forms directly to you, meaning you’ll never have to visit a physical location. This enables us to sell to customers across the country, no matter their zip code!
silencers
rifle silencers
No, rifle silencers are actually legal in 42 U.S. states. Only 9 states (California, Illinois, New York, New Jersey, Massachusetts, Rhode Island, Delaware, Hawaii and Washington D.C). ban individual ownership of silencers or suppressors.
Lucky for you, Silencer Central is here to make the process easy! We are licensed in all 42 states where rifle silencers are legal. If you want to learn more about regulations in your state, check out our state-by-state guide on silencer ownership.
And if you happen to be traveling with your suppressor, the good news is that, unlike other NFA items, you don’t have to notify the ATF when you travel or relocate.
Absolutely. In fact, rifles are by far the most common type of firearm on which to mount a silencer. Like rifles, silencers are common among hunters. Your hunting rifle should definitely have a silencer, because first and foremost, they reduce noise pollution. Meaning you’re not going to scare off every critter in a 10 mile radius.
But silencers also reduce recoil, muzzle blast, and the risk of hearing damage. They also are known to increase accuracy, helping you make that once-in-a-lifetime shot. Some rifles can also be integrally suppressed to reduce noise even more. They also have important safety benefits, like allowing you to be more aware of your surroundings. Without having to wear hearing protection, you can listen for sounds of other predators or hunters.
Well the jury’s out on this one, because there is so much that affects a suppressor’s dB testing at any given time. A gunshot’s volume, measured in decibels, or “dB”, depends on the weight, caliber, and speed of the bullet, the length of the barrel, not to mention how fast the gunpowder is burning. A gunshot can also be impacted by something as simple as temperature or humidity.
Price is not necessarily indicative of quality. But material is. The best suppressors are made out of 100% titanium. Titanium is both lightweight and quicker at cooling hot muzzle gas than steel or aluminum.
If we had to choose a quietest silencer to recommend, we’d suggest the BANISH 30 multi-caliber suppressor, because it has the highest sound reduction in comparison to its competitors of similar weight and material.
What is the best rifle suppressor? This is up for debate, but we’re partial to the BANISH line of silencers. BANISH suppressors are the original multi-caliber suppressors, making them incredibly versatile and able to fit more than just one gun. Our BANISH suppressors were designed to be most user friendly silencers on the market, without sacrificing quality.
When buying a suppressor, you should make sure to think about what caliber you need, what material it’s made out of, how it will impact your performance (ie. point-of-impact shift, velocity, recoil), whether you need a threaded barrel, if you’re interested in subsonic shooting, getting the paperwork done with the ATF, and price.
You should also consider how and why you’ll be using it. Are you hoping to reduce noise pollution? Increase the accuracy of your shots? Trying to reduce the risk of hearing loss? All these factors will contribute to the type of silencer that works best for you.
When you fire a round, burning gas builds up pressure behind the bullet and thrusts it down your bore. When the bullet leaves, a burst of host gas exists behind it, releasing a loud noise.
In comes a silencer. A silencer slows down the gas by redirecting it through a series of baffles before it can escape the silencer. This allows any unburnt powder to finish burning off, which reduces muzzle flash. It also gives the gas more time to slow down and cool, so that when it does escape the silencer, it’s moving slower and under less pressure, which means it’s also quieter.
If you want to learn more about how silencers work and get into the nitty gritty, check out our article, “An Inside Look at How Suppressors Work”.
Choosing the right silencer can be complicated. There are a ton of different factors that come into play, including ones you may not have thought about. These include things like material, weight, length, caliber compatibility, price, and whether or not it’s threaded.
You might also want to consider how you are using it. Is your silencer going on a rifle or a .22? Is it a hunting rifle, or one you keep for protection? What are your goals? To reduce the risk of hearing loss? Have less noise pollution? Increase your shot’s accuracy? Reduce recoil? All these factors make a difference.
That’s why the Silencer Central team is here to help. Our sales staff will walk you through the process from start to finish, from choosing the right silencer, to filling out the paperwork, and getting it in your hands.
Pistol
Yes, pistol silencers are legal. Silencers, while regulated, actually make guns safer for everyone. They reduce the risk of hearing loss, allowing gun owners to operate without earplugs, which in turn, helps them be much more aware of their surroundings.
So yes. With the exception of 8 states (California, Illinois, New York, New Jersey, Massachusetts, Rhode Island, Delaware, Hawaii), and one federal district, Washington D.C, owning suppressors is legal in the United States of America. If you want to know more about the specific regulations on silencers in your state, read our state-by-state guide on silencer ownership.
And if the process seems a little daunting, don’t worry. Silencer Central is here to help you navigate the buying process, wait time, and paperwork. We’re licensed in all 42 states where pistol silencers are legal.
Yes, absolutely. Silencers offer many of the same benefits to pistol shooters as they do to rifle and shotgun shooters. Even the best Pistol silencers tend to get a bad rap because unlike rifles or shotguns, pistols are often bought to conceal or be discreet.
However, a suppressed pistol is a great training aid. Suppressors reduce recoil and noise flinch. A silencer makes a gun safer and more manageable, with less risk of hearing loss, and allows you to take off your hearing protection and be aware of the space around you. A silencer also reduces noise pollution, recoil, and muzzle flash, and increases accuracy. In some cases, it might even increase the velocity of the bullet.
How loud a suppressed pistol is depends greatly upon the caliber being fired and the suppressor being used. Unlike in the movies, a silencer won’t give you a completely soundless bullet whispering through the air. The word “suppressor” is really more accurate because these products suppress the sound of a gun rather than silence it.
That said, the level of sound suppression you typically get from a silencer is between 20 – 36 dB. Which is enough to significantly reduce the risk of hearing damage. Essentially, suppressors make guns just quiet enough to reduce most or all of the downsides associated with extremely loud gunshots.
See our article about how we test our silencers for more information.
A .45 ACP and a 9mm blast will likely sound very similar. That said, a suppressed .45 ACP will likely be quieter than a suppressed 9mm. But this is actually a very complicated question to answer because it depends on more than ammunition. It will also depend on the gun, barrel length, silencer being used, and more uncontrollable factors like the weather and humidity.
Technically, because standard .45 ACP ammo is subsonic, it is more effectively suppressed than 9mm ammo. 9mm is actually what can be called “supersonic”, which means that it breaks the sound barrier. Supersonic bullets are generally louder because a suppressor cannot quiet the sonic “crack,” so a suppressor will probably do more for a 45 ACP than a 9mm.
That being said, it really will depend on more factors than just ammo, and the difference we’re talking about here is small. In general, it’s best to use hearing protection when shooting a gun. But both a silenced .45 ACP and silenced 9mm will be below 140 dB, the OSHA threshold for hearing damage.
In our opinion, the best pistol silencer is a BANISH 45, since its interchangeable piston mounting system makes it so versatile. Its lightweight titanium body and great sound reduction make it easily a great option for a 9mm.
We also like the Illusion 9. Illusion 9’s unique design allows shooters to see easier and effectively use the standard iron sights on the pistol. The downside is, of course, that it is only available for a 9mm, so is less versatile.
For a full breakdown, check out our 2020 round-up of best pistol silencers.
Most standard pistols can be used with silencers, but we recommend talking with our team to know for sure if your pistol is ideal for being used with a silencer. We’re available to help Mon – Fri 8:30 am – 5 pm, Sat 12-3 pm (CT), and can be reached by phone at 866-891-4494 or by email at customerservice@silencercentral.com.
shotgun
No, shotgun silencers are absolutely not illegal. With the exception of a few homebrew, DIY contraptions, all silencers are legal in 42 of our great 50 states. Only California, Illinois, New York, New Jersey, Massachusetts, Rhode Island, Delaware, Hawaii, and Washington D.C. ban individual silencer ownership.
We made it our business to be everywhere silencers are legal, so we’re licensed in each of those 42 states. If you want to learn more about specific regulations in your state, feel free to check out our state-by-state guide on silencer ownership, or give us a call at 866-891-4494. We’d be happy to talk you through the legality, paperwork, and decision process.
You sure can, with the one and only commercially available shotgun suppressor, the SilencerCo Salvo 12.
Until recently, the answer to this question was “no.” However, to the benefit of shotgun owners around America, that has finally changed.
These days, you can absolutely silence a shotgun. The folks over at SilencerCo have made it possible with the Salvo 12. The Salvo 12 is a 6.73-12.52″ aluminum beauty that can handle nearly all shotguns and ammunition on the market today including pump actions, semi-autos, and inertia driven models. It puts the sound down to a safe 136.8 dB, well below the 140 dB recommended by OSHA.
A shotgun silencer like the Salvo 12 is perfect for turkey hunting out near our headquarters in Sioux Falls, South Dakota, or if that’s not your speed, sporting waterfowl or clay pigeons, or yes, home defense.
The Salvo 12 is the only shotgun silencer on the market, and at its full-length configuration, it brings a shotgun’s noise level down to 136.8 dB. Which, according to OSHA, is considered safe without additional hearing protection.
There is only one commercially available shotgun silencer on the market, the Salvo 12. There is an incredible amount of engineering and design that has gone into building the world’s first widely-available shotgun silencer. The quality of work inherent to this product is reflected in the price.
Naturally, though, if and when more shotgun silencers eventually do make it onto the commercial market, we will likely see a wider range of prices. But until then, you have a great choice with the Salvo 12, and although the price isn’t flexible, you can at the very least trust that it is a one-of-a-kind piece of craftsmanship.
FREQUENTLY ASKED QUESTIONS At Silencer Central, we’re only interested in providing you with actionable knowledge about gun silencers, how to select the right suppressor for your needs, and more. Check out our most frequently asked questions below to learn more or contact us with specific questions. gENERAL eFORMS Silencer Background Silencer Ownership & Legality Silencer buying process Order Status Shipping …

Ammunition Firearms Silencers 101
Why You Should Shoot .300 Blackout Suppressed
One of the hottest new rounds to emerge in the past few years is .300 Blackout; this is a true dual-purpose intermediate sized cartridge that can be fired in both subsonic and supersonic loads. It was designed to be used in AR-pattern rifles with only a barrel change to convert a traditional AR-15 rifle from 5.56 NATO. It has since become one of the most popular rounds to use with a suppressor.
This relatively new cartridge has been around a bit longer than some might think and has its share of fans and detractors, but .300 Blackout has more than proven itself as a hunting, defensive and target round in that time. It may not be the be-all and end-all cartridge, but for most shooters and hunters, .300 Blackout is worth taking a second look at.
WHAT IS .300 BLACKOUT AMMO?
The .300 Blackout round has its roots in the 300 Whisper cartridge designed by JD Jones of SSK Industries in the early 1990s. Jones formed the brass from 221 Fireball cases expanded to take a .30 caliber bullet. By varying the load, lighter bullets could be fired at supersonic levels with the power of the Soviet 7.62 x 39 or used with heavier bullets at a subsonic level for use with a sound suppressor.
Unfortunately, the round was trademarked by SSK and other manufacturers were unable to manufacture barrels or even brass and dies for the round. The 1994 Federal Crime Bill and Assault Weapon Ban did not help the subsonic cause, either, as threaded barrels on semi automatic rifles made them subject to the ban. National Firearm Act laws governing the sales of silencers were also misunderstood at the time and silencer ownership was a mere sliver of what it is today.
It seemed as if the round was doomed to die in the “also-ran” wildcat category until the Federal Assault Weapon Ban was allowed to sunset in 2004 and a company called Advanced Armament Corporation (AAC) began to show interest in the 300 Whisper. AAC was eventually bought out by Remington Defense and the two companies worked on the design as a potent new caliber that could address perceived shortcomings with the 5.56 NATO round.
Remington and AAC changed the design slightly by using trimmed and expanded 5.56 NATO brass as opposed to .221 Fireball or .222 Remington as the parent case. They normalized different load data and submitted the new cartridge to SAAMI (Small Arms Ammunition Manufacturers Institute) and CIP (Permanent International Commission for the Proof of Small Arms) for standardization and christened the new round .300 AAC Blackout by CIP and .300 BLK by SAAMI.
The improved design means that it will work with a standard AR15 or M16 bolt and magazines with the only real part change being the barrel. Another positive note is that .300 Blackout and the original 300 Whisper cartridge are completely interchangeable from barrels to reloading dies as well as reloading components and specifications.
As a result of its popularity we have even seen the retail price of .300 Blackout ammunition decrease over time. This is always a good sign with regard to the longevity of an ammunition cartridge in the market.
PERFORMANCE AND BALLISTICS
In its standard form as a subsonic round, .300 Blackout most closely resembles the 7.62 x 39mm round first used in the SKS and AK-47 rifles of the former Soviet Union. In its subsonic loading it has been compared with both subsonic 9mm and .45 ACP.
One of the main reasons that the US Military was looking for a replacement round for 5.56 NATO was the loss of energy and velocity by the 5.56 NATO round as it was fired through barrels that were increasingly getting shorter.
The 5.56 round was developed for use in 20” barreled rifles. Severe deficiencies were found when trying to make the military service rifle shorter. Additionally, the use of a suppressor dictated going to a shorter barrel as soldiers were finding full sized rifles becoming unwieldy with a 5” to 8” sound suppressor mounted on the muzzle. Another consideration here was the effect of the initial blast of unburnt powder and flash increasing wear on the initial baffle of a 5.56 suppressor.
.300 Blackout was optimized to be fired through shorter barrels and even in supersonic loadings it did not have that initial blast problem. The round exceeded most military expectations for the caliber in both subsonic and supersonic renderings. On the civilian side, .300 Blackout has proven to be a performer in the field for hunting and on the competitive shooting circuit.
THE BEST .300 BLACKOUT SUPPRESSORS
SUPPRESSOR MODEL | CALIBER | WEIGHT | LENGTH | PRICE |
---|---|---|---|---|
BANISH 30 | .30 | 10 - 13 oz | 7 - 9 in | $999 |
Dead Air Sandman-S | .30 | 17.7 oz | 6.8 in | $999 |
SilencerCo Omega 300 | .30 | 14.8 oz | 7.08 in | $699 |
BANISH 30 GOLD | .30 | 13 oz | 8.2 in | $1,699 |
Here are our top four picks for the best .300 Blackout suppressors:
EDITOR’S PICK – BANISH 30

The Banish 30 is a direct-thread suppressor that mounts on conventional 5/8×24 threads and comes out of the box as a 9″ suppressor holding eight baffles.
If, however, you’ll be shooting suppressed in tighter, more confined spaces, or you just don’t want as much can hanging off the end of your barrel, then you’ll benefit greatly from this suppressor’s modularity. It can easily break down and assemble into a 7″ configuration with six baffles. Either way, you’ll still get great sound suppression with minimal added length on your .300 Blackout rifle, carbine, or pistol in either configuration.
Weight is just as important as the overall length in this situation. The Banish 30 is made from a strong titanium alloy for unmatched durability at an extremely light weight. In the full configuration, it weighs 13 ounces; in the short configuration, it weighs just 10 ounces. You’ll be hard-pressed to even feel it on the average .300 Blackout rifle, carbine, or pistol!
When it comes time for cleaning, the Banish 30 easily comes apart from both ends and is ready to be tossed in a tumbler, ultrasonic cleaner, or cleaned manually. Reassembly is a breeze due to the baffles being keyed and indexed for exact alignment.
WHY WE LIKE IT:
- Modular design to fit specific needs
- User-serviceable for easy cleaning
- Titanium offers great strength with minimal weight
BANISH 30 SPECS
- Weight: 10 oz or 13 oz
- Length: 7″ or 9″
- Finish: GunKote and DLC
- Materials: Titanium
- MSRP: $999
Compact Pick - Dead Air Sandman-S

Dead Air's Sandman suppressors have great reputations and with good reason. The Sandman-S is the "little brother" to the Sandman-L, and while it may be smaller, it still retains all of the performance. Featuring a low blowback design, the Sandman-S is touted for not only its compact construction but also for its impressive noise reduction at the ear. It does a great job at dropping the decibels of a .300 Blackout cartridge.
The Dead Air Sandman-S features a quick-detach mounting system that incorporates an index pattern for ease of mounting and removal. It's also outfitted with a removable front-end cap, making the Sandman-S extremely user-serviceable, allowing for quick disassembly, cleaning, and fast reassembly.
Why We Like It:
- QD mounting system for easy on-off
- Great sound reduction for the size
Dead Air Sandman-S Specs
- Weight: 17.7 oz
- Length: 6.8"
- Finish: Cerakote
- Materials: Stainless Steel and Stellite
- MSRP: $999
LIGHTWEIGHT PICK – SILENCERCO OMEGA 300

SilencerCo's Omega 300 is the lightest, shortest, quietest, full-auto-rated, titanium silencer in its category. If you like to have choices and options, it even comes complete with direct thread and fast-attach mounts, as well as a removable Anchor Brake to reduce recoil, which can be replaced with a flat front cap if you don't need the brake.
The Omega 300 is popular for all sorts of .30-caliber chamberings, including the .300 Blackout cartridge. That makes it one of the best multi-caliber suppressors in its class, so it will be right at home on a variety of other rifles, too. You aren't just limited to the .300 Blackout, so try it out with .30-06, .308, .300 Blackout, etc.
Why We Like It:
- Multiple mounting options come with it
- Comes with a brake in the box
- Best in class specs in its category
SilencerCo Omega 300 Specs
- Weight: 14.8 oz
- Length: 7"
- Finish: Black or FDE
- Materials: Cobalt, Inconel, Stainless Steel, and Titanium
- MSRP: $699
Premium Pick - Banish 30 Gold

An exceptionally versatile suppressor, the Banish 30 Gold is rated for calibers from rimfire up to 300 RUM. All Banish suppressors have been designed for unmatched sound suppression, and testing shows that the Banish 30 Gold reduces the report by 36 decibels. The average sound level heard by shooters from the Banish 30 Gold is 132.9 decibels!
Like all Banish suppressors, the Banish 30 Gold is made from a strong titanium alloy that results in unmatched durability at an extremely lightweight of just 13 ounces.
The Banish 30 Gold is an 8.2-inch quick detach suppressor holding 11 baffles. Completely user-serviceable, you can disassemble the suppressor for cleaning in a tumbler, ultrasonic cleaner, or by hand. When you’re ready to put it back together, the baffles are keyed and indexed for a hassle-free reassembly.
Perfect for everything from a fun time at the range to big game hunting, the Banish 30 Gold will significantly reduce the report and recoil of large-caliber rifles (up to 45% in testing), while still being effective on rifles down to rimfire calibers.
WHY WE LIKE IT:
- User-serviceable for easy cleaning
- Titanium offers great strength with minimal weight
BANISH 30 GOLD SPECS
- Weight: 13 oz
- Length: 8.2″
- Finish: Cerakote
- Materials: Titanium
- MSRP: $1,399
BENEFITS OF USING SUPPRESSORS
There are a lot of different reasons why you should use a suppressor with .300 Blackout, but here are three of our favorite benefits that make a suppressor worth it.
LESS NOISE
As was explained above, suppressors bring down the decibels that you hear each and every time a gun is shot. Making less noise while shooting is beneficial if there are a lot of people at the shooting range if you’re out hunting, or simply if you’re trying to do everything possible to preserve your hearing.
BETTER ACCURACY
An extra benefit of suppressors is that they reduce the felt recoil when a gun is fired. Since there’s less recoil, both you and the gun are moving around less than you would without a silencer. That reduction in movement helps you to make more accurate shots.
MORE FUN
Shooting suppressed is simply a ton of fun. Seriously, we’ve never met anyone who shot suppressed for the first time and then turned around with a frown on their face. It just makes the entire shooting experience a lot more enjoyable.
SHOOTING 300 BLACKOUT AMMO WITH A SUPPRESSOR
As we mentioned numerous times by now, .300 Blackout has a subsonic range of ammunition choices and makes for an excellent suppressor host. The advantages are two-fold in that if one sticks to strictly subsonic loads they can shoot through a suppressor rated for .45 ACP or 9mm. Should the shooter wish to shoot the supersonic round suppressed, a silencer rated for 308 Winchester will easily handle both supersonic and subsonic loads.
.300 Blackout subsonic is one of the quietest rounds to suppress, particularly when fired through a closed breech firearm like a bolt action or single shot rifle. There is no noise from the action or any created via the ejection process as noticed in a semi automatic firearm.
Additionally, we find .300 Blackout in supersonic form to have a very mild and pleasant tone when fired through most suppressors rated for .308 Winchester. It may not be as quiet as a .300 BLK subsonic, but sometimes absolute silence is not the goal.
POPULAR COMPARISONS
Every new cartridge is often compared to an older one and .300 Blackout is no exception. These comparisons are both a good thing and a bad thing for a few reasons.
On the good side, hunters and shooters generally want an idea of how a new round will perform. Comparing .300 BLK to an existing round with regards to bullet weight, caliber, velocity and energy sets the stage. Often .300 Blackout supersonic loads are compared to rounds such as 30-30 Winchester and 7.62 X 39mm. This gives a shooter an idea of what to expect recoil wise and the intended use of the round.
Another consideration for rifle shooters is often the size of the rifle’s action. While this was addressed initially by use of .300 Blackout in the AR-15 or M16 platform with regard to bolt face, magazine configuration, etc, it is also an important consideration for use in a bolt action rifle. For the bolt action rifle shooter, action length is often an important consideration, as this can affect the weight of the rifle and its overall configuration for handling recoil. Typical bolt action lengths are referred to as short, long and Magnum. The long action is used for rifles chambered in calibers such as 30-06 Springfield. Magnum actions are intended for powerful belted magnum cartridges such as 300 Winchester Magnum, .459 Winchester Magnum or .375 Holland & Holland. The short action is intended for everything from .17 Remington up to .308 Winchester and this is the size needed for a bolt action rifle chambered in .300 Blackout.
The subsonic 300 Blackout loads are often compared to .45 ACP, 10 mm or 9mm subsonic rounds. This showcases the dual purpose of the round. The advantage of .300 Blackout is if the shooter wants an AR-pattern rifle or pistol that is easily suppressed, they can use a common magazine and typically only need to swap an upper receiver. Pistol caliber conversions for the AR platform often need different magazines, buffer assembles and other changes to make them effective and reliable.
Where it becomes a bad thing is that these comparisons rarely give the complete picture to the shooter or hunter and can actually be a disservice to .300 Blackout and to the round to which it is being compared.
.300 BLACKOUT VS. 556

The most obvious comparison for .300 Blackout will be made with 5.56 NATO. After all, this is the round it was intended to dethrone.
As we stated earlier, this is a disservice to both cartridges. The 5.56 NATO round has a longer range, higher velocity and some would say more inherent accuracy. In its supersonic loading, .300 Blackout shares similar characteristics with the 7.62 X 39mm round which has often been set up as the rival of 5.56 NATO for the past 60 years.
Terminal ballistics for both rounds as a military cartridge will be compared ad nauseum. A lighter bullet in the form of 5.56, by as much as two to 3 times the weight, travelling at 75% to 100% of the velocity has its advantages over the heavier and slower .300 Blackout. Yet some troops would say that a heavier and slower bullet may not have the penetration ability of the 5.56 but addresses the overpenetration issues noted by US Army Rangers and Infantry in operations in Somalia where the 5.56 required multiple hits on target to dispatch an enemy soldier, whereas the 7.62 x 39mm seemed more effective at stopping an enemy combatant with a single round.
One of the dangers of keeping both rounds in the same collection is that .300 Blackout will actually chamber in a 5.56 rifle. It cannot be safely fired from that platform without causing a catastrophic failure to the firearm and injury or possibly death to the shooter and those in close proximity.
For this reason, we recommend that if you shoot both calibers to incorporate some variables with regard to your shooting components and accessories. For example, use one type or color of a magazine for one round and a different one for the other. This can be taken a step further by loading .300 Blackout subsonic rounds in a different magazine size from the .300 Blackout supersonic rounds so that a supersonic round does not accidentally go through a pistol caliber or .300 BLK subsonic rated suppressor accidentally.
The key advantage here is that AR magazines are inexpensive when compared to just about every other platform out there. This is another inherent advantage of .300 Blackout.
It is not a bad idea to ensure that the upper receivers can be easily distinguished, whether by different optics, rails or colors.
300 BLACKOUT VS. 350 LEGEND
When 350 Legend debuted, Winchester claimed it was the fastest straight wall cartridge ever released. Like .300 Blackout ammunition, it had the ability to be loaded to subsonic or supersonic levels and it would fit in a standard AR15 action and magazine. Some hunters speculated that it would sound the death knell for .300 Blackout due to the fact that hunters in some north eastern and midwestern states were limited to hunting deer with a straight wall cartridge.
As fine a cartridge as it is, .300 Blackout had the advantage in that it had more than a 10-year head start on 350 Legend. There are simply more barrels, magazines, rifles, pistols and other accessories dedicated to .300 Blackout as opposed to 350 Legend. But the 350 Legend has caught up rather quickly, and it certainly has the upper hand as a hunting caliber in states where bottleneck cartridges are prohibited for big game hunting and performs well on animals like deer and black bear.
The other disadvantage is the limited amount of .35 caliber suppressors made for the supersonic load in 350 Legend. Subsonic 350 Legend can be safely fired through most 9mm suppressors in the same manner as .300 Blackout subsonic.
300 BLACKOUT VS. 223
While 5.56 NATO and .223 Remington are used interchangeably, they are not the same round. The 5.56 NATO is loaded to a higher pressure level than .223 Remington. Furthermore, .223 Remington is considered a commercial civilian use round, making it more suitable for hunting applications, not unlike the .300 Blackout supersonic load. Yes, you can use the .300 Blackout as a very effective hunting round if you know the limitations to range.
In this regard we often see more soft point, hollow point and general use hunting rounds in .223 Remington as opposed to 5.56 NATO. However, .223 Remington is considered more of a small game or varmint round, as opposed to a heavier round like the .300 Blackout.
Again, it goes back to the purpose of the round and shows how a long range varmint round, as was the original intent of .223 Remington, cannot be justly compared to a slower, heavier bullet like the supersonic .300 Blackout. .223 Remington is ideal for coyotes and prairie dogs at long range whereas .300 Blackout is more suitable for deer or black bear at shorter ranges.
Get the Best .300 Blackout Suppressors
The market for suppressors is plentiful, and narrowing it down to the right one for you can be confusing. Thankfully, the Silencer Central staff has been shooting and selling suppressors for more than 15 years. Suffice it to say that we’ve got a pretty good handle on which silencers pair best with certain guns and calibers, like the .300 Blackout cartridge. If you’re having trouble deciding, don’t hesitate to reach out to us. We’ll happily talk you through the options and then, when you’re ready, get you on your way to silencer ownership and suppressed shooting!
Related Articles

How Silencer Central Pioneered Ship-To-Your-Front-Door Service
March 11, 2025
The Silence of the Hunters – A Hearing Protection Perspective
March 6, 2025
Caliber Sizes: Choosing the Right Suppressor
March 4, 2025One of the hottest new rounds to emerge in the past few years is .300 Blackout; this is a true dual-purpose intermediate sized cartridge that can be fired in both subsonic and supersonic loads. It was designed to be used in AR-pattern rifles with only a barrel change to convert a traditional AR-15 rifle from 5.56 NATO. It has since …

Firearms How To Hunting
Hone your hunting skills with a suppressed varmint hunt
“Clean miss, low right,” my buddy proclaimed in a slightly mocking tone for the obvious prairie dog miss. In my defense, the shot was more than 400 yards with a stiff, bullet-altering breeze that created a mathematical conundrum of calculations. Had the prairie dog been a pronghorn my buddy would now be thinking pack out instead of preparing for his next taunting when I missed again.
A lineup of factors facilitated a great day of summer varmint hunting. The prairie dog town we targeted had not been hammered by the recent outbreaks of bubonic plague. Adults and pups busied themselves throughout the colony. The winds were breezy, but not gale force as often occurs across the prairies. Temperatures settled in the 80s, very different from searing 100-degree temperatures common in July. Adding to the pleasure of the day was the fact we adorned our rifles with suppressors. The ability to talk without yelling at each other and share information in a normal fashion between shots boosted the educational value of sending projectiles downrange.
If you do not own a suppressor by now, you are missing a world of stifled rifle cracks. Silencer Central can put you on track to the ideal model that mates with your firearm or in the case of many of their models, teams with all your firearms. Summer varmint hunting provides a hunting platform to assess your suppressed rifle and so much more.

Shoot more – Spook less
Without question, the continuous bang of a rifle with echoes resonating across a valley soon make varmints weary. Your hunt may focus on the popular prairie dog with colonies found across the Great Plains and throughout Western basins. They thrive on many public lands including National Grasslands and Bureau of Land Management tracts. You don’t live near a prairie dog, nor have time to travel to their ZIP code? No worries.
In the East you can pursue Punxsutawney Phil’s brethren in farm fields north and south. Famers appreciate the removal of these diggers. Varmint hunters of the northern tier of American seek out the Richardson’s ground squirrel. Midwestern varmint hunters visit pastures to place crosshairs on the small thirteen-lined ground squirrel. Even California has a varmint problem with their abundant California ground squirrel.
Some of you may skip the rodents altogether and keep summer busy with hog hunts in states where the problem allows hunting year-round, day or night. Those varmints even offer a chance to feed your barbecue cravings if successful.
Regardless of your varmint hunting mission, the use of a suppressor reduces the loudness on most modern centerfire rifles to levels the Occupational, Safety and Health Organization (OSHA) deems as not harmful to your hearing. This is especially true in a repeated setting like an afternoon of varmint hunting. In addition to preserving your hearing, suppressed shooting spooks varmints less, particularly if you set yourself a distance away from the varmint home territory. Instead of getting less than 10 shots in before the varmint alarm bells ring, you could spend the entire day at a location.

Testing a rifle
Varmint hunting provides the perfect workshop to test rifles. No doubt your .22-250 Remington, .223 Remington, 6mm ARC, or (name your favorite varmint caliber), will make it into your truck. To make your day even more of a learning experience, bring along your preferred big game caliber. Sure, it will be overkill, but except for a hog or possibly a pudgy ground hog, you likely have no plans to bring back a heap of prairie dogs for a Beverly Hillbillies-style potluck.
Varying shooting positions, changing climatic conditions and fluctuating distances, combined with your fall shooting iron, gives you valuable insight on how your rifle performs beyond the rifle range. I routinely bring along my two big game rifles, both Bergaras chambered in the old school .300 Winchester magnum and the newer 7mm PRC.
Launching several rounds from these canons adds to varmint management in a big way, but how bullets perform in the real arena is invaluable. A suppressor helps tame calibers like this by reducing recoil. That is important since recoil, combined with the loud report of a rifle has direct links to flinching. Suppress and test your hunting caliber for a fall warmup on a varmint outing.
The Best Suppressors for Varmint Hunting
SUPPRESSOR MODEL | CALIBER | WEIGHT | LENGTH | PRICE |
---|---|---|---|---|
BANISH 30 | .30 | 11.2 oz - 14.3 oz | 7 - 9 in | $999 |
YHM RESONATOR K | .30 | 12.4 oz | 5.65 in | $699.95 |
COASTAL XDS .223 | .223 | 28 oz | 8.5 in | $550 |
BANISH BACKCOUNTRY | .30 | 7.8 oz | 5.5 in | $1,099 |
DEAD AIR NOMAD 30 | .30 | 14.5 oz | 6.5 in | $949 |
HUXWRX VENTUM 762 | .30 | 14.5 oz | 6.7 in | $996 |
SILENCERCO OMEGA 300 | .30 | 14.8 oz | 7.08 in | $699 |

Honing your shooting skills
Whether shooting with a varmint caliber or your big game pet caliber, honing your skills while testing calibers on varmints benefits your future hunts. One of the challenges members of our hunting party sets up is distance estimation. Sure, distances today are available with the tap of a button. My Sig Sauer BDX knocks out accurate ranges to 1,000 yards and beyond and serves up in easy-to-read LCD readouts. But what happens if that device fails, batteries die, or the bull of a lifetime only gives you a fleeting second to shoot? Can you come up with an estimated range in the blink of an eye? Choose targets and do not range them beforehand. Or, if you do not want to miss, estimate the range beforehand and then have your partner zap the precise distance to see if you win.
Memorizing the trajectory of your favorite hunting caliber helps when you need to make a snap decision. Attaching a DOPE card (data on previous engagement) provides a cheat sheet secured to your buttstock for quick reference. Also, shooting a caliber with a flat trajectory and high ballistic coefficient improves your odds of landing a bullet in a pie plate target, common for big game.

When you quickly need to arrive at a distance, compare the space between you and the target with something you already know. The most common distance to memorize is 100 yards, a football field's distance, and then mentally calculate how many fields to the target. Come up with your own football field unit as a measurement but work with it to use as a crutch if your rangefinder is not readily available.
Judging the wind also plays a critical role, especially for the long shot. I could write volumes on how to read a wind mirage, vegetation movement and how to estimate wind that could be blowing harder on the other side of a canyon. Yes, it is a science. Nevertheless, shooting in varying winds at varying distances gives you a feel for drift and how heavier bullets from larger calibers handle that wind over a smaller projectile. Play in the wind!
Working on stealth

Finally, test your stealth with varmints. OK, some gophers may not require a ghillie suit, total camouflage and a crawling approach, but Punxsutawney Phil and his cousins have been known to run for the hills when they see a vertical shape approaching. Put yourself in stealth mode when needed to get your mind in the hunting season mood.
Public land prairie dogs offer a readily available hunting experience, but even these small-brained creatures understand that trucks and upright forms equals danger by the time the Fourth of July arrives. Popular shooting areas soon educate varmints to the point that a cloaked arrival in combination with suppressed shooting extends your opportunities. On several occasions I suggested to shooting partners that if we crawl to a rise and commence shooting first from prone, before deploying shooting tables, we will get an hour or more extra of shooting. And as noted, using a suppressor just aids in that veiled approach.
Varmint hunting may not offer the delicious reward of a backstrap (unless hogs are your goal), but the outing provides the perfect classroom to make your rifle a qualified collaborator on your next big game hunt.
About the Author

To many of you, Mark Kayser needs no introduction. An acclaimed outdoor writer, Kayser has written for most major hunting publications including American Hunter, Outdoor Life, North American Whitetail and many more.
He is also a regular guest on the Deer & Deer Hunting podcast, and on many hunting television shows. He is based in the heart of big-game hunting – Sheridan Wyoming.
“Clean miss, low right,” my buddy proclaimed in a slightly mocking tone for the obvious prairie dog miss. In my defense, the shot was more than 400 yards with a stiff, bullet-altering breeze that created a mathematical conundrum of calculations. Had the prairie dog been a pronghorn my buddy would now be thinking pack out instead of preparing for his …

Firearms Hunting
The Best Suppressor for Coyote Hunting
(Cover image from Silencer Central customer Bill F. Check out his review of a BANISH 30 below)
Without human interaction, the natural balance of coyotes and prey species ebbs and flows based on multiple criteria, such as forage base for the prey and population numbers. When the prey population goes up, the coyote population follows and vice versa. The problem, of course, is us. Human interaction affects the natural flux of predator/prey relationships, which is why hunting is such a vital part of the conservation process for coyotes. It has been proven time and time again that hunting helps control animal populations, and anything that helps hunting in turn, helps the conservation process. This is where using a suppressor for coyote hunting comes into play.
By now, you likely know that using a suppressor reduces the decibel level of the report from discharging a firearm. Suppressors also reduce recoil and muzzle jump, making your firearm more accurate. All of these points make a suppressor a valuable tool for coyote hunting. If your rifle is more accurate, that helps with the ethical part of shooting, and the reduction in decibel level helps on several angles. It protects your hearing, as well as helps make it more likely of calling in another coyote to the same location. And if you are coyote hunting at night, the sound reduction teamed with the reduced possible of muzzle flash has other benefits.
Which is the best suppressor for coyote hunting? Just like you found when you bought your coyote-hunting rifle, you have choices. Let's take a look at what has worked for us to help you decide.
Top Suppressor Models for Coyote Hunting
Coyote guns are both a personal and situational choice. One hunter may opt to use a dedicated AR-platform rifle while another may choose a bolt-action in .22-250. We know a guy that referred to his 7mm Rem Mag as his coyote rifle. He uses light bullets to take coyotes at long ranges. Everyone has different firearms they use for coyotes, and these are our top suppressors to go with them.
Name | Caliber | Weight | Length | Modular? | Price |
---|---|---|---|---|---|
BANISH 30 | .30 | 10 oz - 13 oz | 7-9 in | Yes | $999 |
BANISH 223 | .223/5.56 | 11.4 oz | 7 in | No | $ 849 |
BANISH 30 Gold | .30 | 13 oz | 8.2 in | No | $ 1,699 |
SilencerCo Salvo | 12 gauge | 19.6-34.4 oz | 6.73-12.52 oz | Yes | $ 1,169 |
BANISH Backcountry | .30 | 7.8 oz | 5.5 in | No | $1,099 |
Before you buy
Coyote guns are somewhat specialized and everyone has his or her own particular favorite. Picking the best suppressor for coyote hunting truly depends upon what firearm you are planning to use it on. There are options for shooting bolt-action rifles and some that are more specialized to the AR platform. There is also a consideration for how you hunt coyotes, too. In other words - Have a serious look at where you hunt, how you hunt, and with what type of firearm you hunt coyotes with. We have a suppressor that will fit just about any coyote hunting type, but some will work far better than others for you because you know how you hunt.

Most Versatile: BANISH 30
We might be a little biased toward the BANISH line, but we have good reason. We test everything on the market and developed the BANISH line to exceed in every area. The BANISH 30 is extremely versatile, so you can use it for your coyote rifle and your deer rifle. It is a direct-thread suppressor that mounts on conventional 5/8×24 threads and comes out of the box as a 9in. suppressor holding eight baffles.
If you're hunting in tighter areas, like up against a wind block on an open field, you may want to put this suppressor’s modularity into action. It can easily break down and assemble into a 7in.configuration with six baffles. Either way, you’ll still get great sound suppression with minimal added length on your coyote rifle in either configuration.
The Banish 30 is made from a strong titanium alloy for unmatched durability at an extremely light weight. In the full configuration, it weighs 13 ounces; in the short configuration, it weighs just 10 ounces. You’ll be hard-pressed to even feel it on the average coyote hunting rifle.
Cleaning the Banish 30 is easy as it comes apart from both ends and is ready to be tossed in a tumbler, ultrasonic cleaner, or cleaned manually. Reassembly is a breeze, too, due to the baffles being keyed and indexed for exact alignment.
Advantages:
- Modular design to fit specific needs
- User-serviceable for easy cleaning
- Titanium offers great strength with minimal weight
Disadvantages:
- You'll want to buy another one
BANISH 30 SPECS:
- Weight: 10 -13 oz.
- Length: 7-9 in.
- Materials: Titanium
- MSRP: $999
What our customers say:
"My BANISH 30 suppressor gave me the opportunity to take two Nebraska coyotes! Without it, I probably would've only been able to take one! It helped with every part of the shot and the follow-up shot on the second 'yote. It is such a versatile can, too. "
- Bill F, NE

.223 Pick - BANISH 223
The AR15 has quickly become one of the most popular coyote hunting rifles on the market, and the BANISH 223 suppressor is optimized to run on that platform as well as on traditional bolt-action hunting and target rifles. It can handle any cartridge from .224 down to .17 HMR.
The BANISH 223 is a direct-thread silencer that mounts on conventional 1/2×28 threads, meaning that there’s no extra expense of buying different kinds of mounts. Made of lightweight titanium, this 7in. suppressor weighs a mere 11.4 ounces but is incredibly durable because of the build material.
Like all suppressors in the BANISH lineup, the BANISH 223 is easily disassembled for cleaning and maintenance. Use a tumbler, ultrasonic cleaner, or a nylon brush; the method of cleaning is up to you. The seven baffles are designed to easily stack and index in any order, making reassembly a breeze. All of this adds up to mean that you’ll spend less time cleaning and more time shooting. This is a perfect can for your hunting AR-15. The coyotes won't hear you coming.
Advantages:
- Titanium is both lightweight and incredibly durable
- Easy to take apart, clean, and reassemble
- Low amount of blowback on a semi-auto rifle
Drawbacks:
- At 7 inches in length, it’s the long for some rifles
BANISH 223 Specs:
- Caliber: 5.56 / .223
- Weight: 11.4 oz.
- Diameter: 1.5 in.
- Length: 7 in.
- Mount Type: Direct Thread
- Material: Titanium
- User-Serviceable: Yes
- Price: $849
What our customers say:
"The BANISH line of suppressors have become a part me and my coyote hunting equipment. I now take 20-30% more coyotes since switching to shooting suppressed. My only problem is I don't have more. I literally try and have a suppressor on pending status at all times."
- Rylan Scholtes, Chicago, IL

Premium Pick - BANISH 30 Gold
If you’re going to go all out and spend the big bucks, you might as well splurge on the BANISH 30 GOLD. It can be used on just about any firearm up to .300 mag, and is a great suppressor for your coyote rifle that can also fit your deer rifle, too.
Made of lightweight titanium, the BANISH 30 GOLD has 11 baffles in a tube that’s just barely over eight inches in length and weighs just 13 ounces. This means you’re getting a suppressor that is as light, short, and quiet as possible, and will make your range day with any rifle one of the most pleasant you’ve ever had.
This QD suppressor is rated for full-auto fire and can be completely taken apart by the user for cleaning. Yeah, we know you’re not supposed to have to take a rifle suppressor apart for cleaning, but it’s nice to know that you have the option to really get in there and get it super clean if you want to.
Advantages:
- Full-auto rated
- User-serviceable
Disadvantages:
- It's pricey (but worth it)
BANISH 30-GOLD Specs:
- Caliber: 7.62/.308
- Weight: 13 oz.
- Length: 8.2 in.
- Price: $1,399
What our customers say:
"I had a few few good days on the hunt for some predators. Using my Silencer Central Banish 30 Gold and Springfield Waypoint in 6mm Creedmoor, I was able to dispatch of some coyotes looking to fill their bellies for the day."
- Taylor Berg, Kansas City, MO

Close-Up Pick - SILENCERCO SALVO Shotgun Suppressor
Wait? A shotgun suppressor? For coyotes? Yep! Many coyote hunters have a shotgun handy for those times when a yote sneaks in and comes in at too-close of a range for the rifle. You're expecting the coyote at 100-200 yards and all of a sudden, there it is at 25. A shotgun is a great option to have handy, especially if you have your rifle set in a swivel rest, like a tripod. Have a shotgun loaded up with some #4 buckshot and a SilencerCo Salvo to save the hunt and your ears, especially if you're buddy is in close doing the calling.
The Salvo 12 is designed to work with just about any kind of shotguns and ammunition. This includes pump actions, semi autos, and inertia driven models. The Salvo 12 is modular , which lets the shooter add or remove sections to balance the sound suppression, weight, and length. The length and weight are a critical part of balancing a shotgun. The Salvo has choke mounts available in improved cylinder, modified, improved modified, and full, so you can set it up o match the ammo and situation. A common combination is Improved modified with #4 buckshot, but you can set your's up however works best for you.
Advantages:
- Works with almost any shotgun
- Modular to adjust for balance
- Has available choke mounts for fine-tuning your spread.
Disadvantages:
- Adds to the length of your shotgun
- Pricey (but worth it)
SilencerCo Salvo Specs:
- Gauge: 12 gauge
- Weight: 19.6-34.4 oz.
- Length: 6.73-12.52 in.
- Price: $1,169
Media review:
"I used the Salvo 12 yesterday on a Benelli 12-gauge several times, equipped with the largest of the Salvo models, the 12-inch version, and discovered that it was actually fairly easy to point and shoot at moving targets with this rig. It took some practice, of course, as the weight on the end of the barrel does shift your balance point."
- Brian McCrombie, NRA's American Hunter Magazine.

Lightest Coyote Hunting Suppressor - BANISH Backcountry
The two most important factors for picking a suppressor for a hunt are sound suppression and weight, and the .30 caliber BANISH Backcountry suppressor was built with those factors in mind, making it a perfect choice for a coyote suppressor for those who like to hike into remote areas.
The Backcountry is a fixed-length suppressor that measures 5.5” in length (5.7” with QD mount) and weighs just 7.8 ounces. That’s a full 1.3” shorter and 2.2 ounces lighter than the BANISH 30 in its short configuration. That may not sound like much, but it makes a world of difference for backcountry adventurers who carefully pack their gear with size and weight in mind.
Rated for calibers up to the .300 Remington Ultra Magnum (RUM), the BANISH Backcountry utilizes six baffles that drop the decibel level down to 135 dB for .308 Winchester, 137 dB for .300 Win Mag, and 138 dB for .300 RUM at the ear – all of which fall below the hearing-safe threshold. What this all means is that this is a suppressor you can use for a wide range of firearms, and if weight is a concern, this is the route to go. It is perfect for those hunters who pack in a long distance to chase 'yotes, especially in the Plains states.
Utilizing a 1.375×24 Universal Mount, the BANISH Backcountry is a direct-thread suppressor designed to eliminate any extra weight associated with a muzzle device method of attachment, but it is also available with an optional muzzle brake attachment.
Advantages:
- Quick-detach and direct thread options available
- User-serviceable
- Lightweight titanium construction
Disadvantages:
- It may be out of the budget for some people
BANISH Backcountry Specs:
- Caliber: Up to .300 RUM
- Weight: 7.8 oz.
- Length: 5.5 in.
- Price: $1,099
What our customers say:

"I was able to take my BANISH Backcountry coyote hunting for the first time. How the coyotes reacted to a suppressed shot compared to a non-suppressed shot is truly baffling. We were able to harvest multiple pairs of dogs, and I will never hunt without my suppressor again. The coyotes simply didn't react the same way that they would have prior to shooting suppressed. My Banish Backcountry has proven itself for all types of hunting. Thanks Silencer Central for making a fantastic product and for changing the game in predator control."
- Barrett Rambie, Arlington, TX
Why Use a Suppressor for Coyote Hunting?
Why use a suppressor for coyote hunting? Why wouldn't you, is a better question. A silencer helps with sound reduction in more ways than one. It also helps with your accuracy, plus you'll find it helps you keep track of everything around you when you fire. Why, indeed!
Sound Reduction Performance

We all know, or should know, that a suppressor on your firearm lowers the sound output from the shot to levels that won't negatively impact your unprotected hearing. On average, a suppressor will provide a 25-35 decibel reduction, which is around the same amount as a pair of ear muffs.
What does that do for you as a coyote hunter? More than you'd think. For one, it helps protect your hearing, which is obvious, but when you're in thick cover it helps much more. Let's say you set up in a thick brush line on the edge of a field calling 'yotes out. That cover can act like a wall, reflecting the sound of your shot back to you. With a suppressor, this is mitigated to a large extent. The sound reflection issue is at its worst if you're set up in rocky terrain.
Recoil Mitigation and Muzzle Control
One of the hidden advantages to using a suppressor is that is helps to reduce the felt recoil from the shot. Not that most coyote rifles have a serious recoil issue, but it helps reduce it, and that can be a major plus if you are introducing a new hunter.
The reduction in recoil also affects your muzzle control, giving you a split second extra to get back on target for a follow-up shot if needed. This is really true for semi-automatic rifles, like an AR-15. We've mentioned ARs a lot in this story, but they are quite popular for coyote hunting. If you want to get a little more information on AR-15 suppressors, read our buyer's guide for the Best AR-15 Suppressors.
Situational Awareness

Another reason to consider a suppressor for coyote hunting is that the suppressed gunshot sound is is altered enough that it makes the source of the shot more difficult for the coyote to zero in on. This is good for a couple of reasons. For one, if you miss on the first shot, using a suppressor can help give you a moment to get off the follow-up shot. Now, we can't help it if your buddies see you miss. You're on your own there.
The other thing it helps with is if you have more than one coyote come to the call. That moment that you get for a follow up shot might just also work on a secondary target. If you miss that one, you can always say you had to rush the shot. Sure - that's believable.
This is part of your situational awareness. That is, your actions and attention are working to keep track of you and what you are doing, and how that affects the area around you. An example, and this is taking situational awareness from level 5 up to say... Level 105, is how Sitka deer hunters on Kodiak Island in Alaska have come to expect (or at least they should) that the bears the area is famous for have come to take the sound of a gunshot as a dinner bell for an easy meal. A suppressor goes to great lengths to mitigate that situation. Coyotes are not on the same level as Kodiak Brown Bears, but they are a predator, and are found in areas where other predators exist, so any opportunity you can get to hunt in stealth mode should be used.
What Types of Suppressors Work Best for Coyote Hunting?
Not to hammer too much on the point, but a hunter's coyote firearm is a personal choice. Most will go with what fits them best, and the type of hunting they do. Modular suppressors and ones that fit multiple firearms and calibers are a great choice as it lets a coyote hunter truly dial in his or her setup. One hunter might favor an AR-15 with a longer bull barrel chambered in .223 Wylde, while another might opt for a bolt-action rifle chambered for .22-.250. The beauty is, they can basically use the exact same suppressor with the appropriate mount. You could even use a suppressor that is designed for a tactical-type situation initially, like the amazing BANISH Speed K Ti. In fact, it would be a great choice for hunting in thick cover, as the short nature of the silencer gives you better range of movement. There is no wrong answer here. If it works for you - it works. Period.
Real Hunters - Suppressor stories from the field

Brian Sheets is an avid hunter in Northern Michigan. He picked up a BANISH 30 suppressor for his deer hunting rifle, and has found he uses it for coyote hunting on his .243.
"I originally got a silencer because I was worried about my hearing," Sheets said. "I retired a couple years ago and found that I pay a lot closer attention to that sort of thing. I was mostly using it on my .308 deer rifle, but thought I ought to try it on my coyote gun."
"About half the time, I am set up in a thick stand of red pine on a ridge overlooking a bowl that has a swampy area to the southwest, and some mixed hardwoods to the east. Having my rifle suppressed in that kind of thick cover really saves my hearing when the coyotes come in. We set out a motion decoy and an e-caller and more than once I've had coyotes come in at the same time from different directions. I can take the first shot and they have no idea where it came from or what is going on. It's a riot! My brother hunts with me a lot and he's planning on ordering him(self) a silencer soon."
In Conclusion
As famed hunting communicator Brandon Butler said recently, there is just no reason not to use a suppressor on your hunting firearm. If you've read to this point in the article, you know all of the benefits to using a suppressor for coyote hunting. And if you don't like the suppressors included in this list, don't worry - Silencer Central carries many more, including ones from the top suppressor manufacturers across the globe.
By this point, it should be pretty clear that Silencer Central is the easiest way to get your new suppressor. In business for almost 20 years, we’re the only dealer that’s licensed to sell in all 42 states where suppressors are legal. Our purchasing process is the easiest in the industry, and we’re ready to help you take the first step towards investing in the perfect coyote hunting suppressor.
Because suppressors are NFA items, it can take longer to get them that it would a regular firearm or any other kind of firearm accessory, but that time is shrinking everyday it seems. Once your silencer has been approved, Silencer Central will ship your new suppressor directly to your door, saving you any more unnecessary steps. It doesn’t get any easier than that! Learn more about the direct shipping service.
Contact Silencer Central today and let’s get your paperwork started!
(Cover image from Silencer Central customer Bill F. Check out his review of a BANISH 30 below) Without human interaction, the natural balance of coyotes and prey species ebbs and flows based on multiple criteria, such as forage base for the prey and population numbers. When the prey population goes up, the coyote population follows and vice versa. The problem, …

Firearms Silencers 101
Fully Auto Rated Suppressors: Benefits & Top Models of 2024
If you've ever had the opportunity to shoot a fully-automatic firearm, then you know how much fun it is. There's really only two ways to improve upon that level of fun, and that would be to make them more affordable and to shoot them with a suppressor. Since the former probably isn't going to happen any time soon, let's focus on the latter because that's something you can do right now.
As long as you've got the right suppressor for your full-auto firearm, then there's no reason why you can't put a pistol or rifle suppressor on there and let 'er rip. Thankfully, there are plenty of options available for full-auto rated suppressors and the process of buying them is simpler than buying the full-auto firearm.
Suppressing Fully Automatic Firearms
You've got to have the right pistol or rifle suppressor if you're going to use it on a full-auto firearm. Suppressors have different ratings, and you want to make sure that you've got one that's rated for full-auto fire. This is a must-have thing, both for safety and for keeping your suppressor and firearm both functional.
Creating a suppressor that's rated for full-auto starts with the materials used in making it. Because full-auto firearms produce a lot more heat in a shorter period of time, the suppressor needs to be incredibly durable and capable of handling those higher temperatures. This is most often achieved through the use of different types of metal:
- Titanium
- Inconel
- Cobalt
- Aluminum (limited use)
- Stainless steel.
When manufactured properly, those materials (or a combination of them) are capable of withstanding the rigors of full-auto fire.
Once the materials are decided, then it comes down to design. The way a suppressor mounts to the barrel, how the baffles interact with the gases, and the way the outer tube is constructed all play a role in properly designing a suppressor that is rated for full-auto firearms.
Benefits of Using a Full Auto Rated Suppressor
There are three main benefits to using a suppressor that's rated for full-auto.
- Noise reduction: Shooting a full-auto firearm makes a lot of noise. That increase in noise directly correlates with an increased need for hearing protection. Given the right combination of firearm and suppressor, the use of a full-auto rated suppressor could make it so that you don't need any external hearing protection.
- Reduced recoil: Since the rate of fire for a full-auto firearm is significantly faster than a regular firearm, it can become uncomfortable for the shooter to withstand the recoil against their shoulder and through their body for an extended period of time. Since suppressors offer the added benefit of recoil reduction, using one on a full-auto firearm can enhance the shooter's comfort for a longer or just more enjoyable time at the range.
- Improved accuracy: In connection with the reduced recoil comes the benefit of increased accuracy. Again, because the rate of fire is faster, it can be harder to maintain the same kind of accuracy you would have when not shooting full-auto. Because less recoil often translates into better accuracy, the use of a full-auto rated suppressor can make it easier to shoot more accurately than without the suppressor.
Choosing the Best Full Auto Rated Suppressor
When it comes down to choosing the best full-auto rated suppressor, there are a lot of different things to keep in mind. First, you should consider if you need a pistol suppressor or a rifle suppressor. This is most easily determined by the calibers that you'll be shooting. If you're shooting rifles or most carbines, then you'll most likely need a rifle suppressor. If you're shooting subguns or some carbines, then you would need a pistol suppressor.
With the rifle suppressors, you may want to focus on recoil reduction for better muzzle control and enhanced comfort. With pistol suppressors, you may focus more on decibel reduction and hearing protection.
Regardless of which type you choose, you'll still want to consider the weight, length, and cost of the suppressor. The weight can impact how the gun handles by changing its point of balance; the length can make an already-long rifle too long to be useful or make a pistol unwieldy; the cost aspect, however, is pretty self-explanatory and is specific to your own budget.
Name | Caliber | Weight | Length | Price |
---|---|---|---|---|
BANISH 30 Gold | .30 | 13.2 oz | 8.2 in | $1,699 |
YHM Resonator R2 | .30 | 16.8 oz | 7.825 in | $ 829.95 |
SilencerCo Omega 300 | .30 | 14.8 oz | 7.08 in | $ 939 |
HUXWRX FLOW 556K | 5.56 | 12.9 oz | 5.5 in | $1,306 |
BANISH 45 | .45 | 9.6 oz or 11 oz | 6.7 in or 8.6 in | $ 949 |
Rugged Obsidian45 | .45 | 10.7 oz or 12.8 oz | 6.7 in or 8.6 in | $875 |
SilencerCo Hybrid 46M | .45 | 12.2 oz or 14.9 oz | 5.78 in or 7.72 in9.3 in | $1.169 |
YHM Sidewinder M2 | .45 | 10.5 oz | 9.3 in | $649.95 |
Top Full Auto Rated Suppressors for Rifles
If the bulk of your full-auto shooting is going to be focused around firearms that are chambered for rifle calibers, then you're going to want a suppressor that's rated for full-auto rifle fire. These are our top four choices.

BANISH 30 Gold
Perfect for a fun full-auto time at the range, the BANISH 30 Gold will significantly reduce the report and recoil of large-caliber rifles (up to 45% in testing), while still being effective on rifles down to rimfire calibers.
The BANISH 30 Gold is an 8.2" quick detach suppressor holding 11 baffles, and comes with two 100% titanium muzzle brakes (1/2×28 and 5/8×24). Completely user-serviceable, you can disassemble the suppressor for cleaning in a tumbler, ultrasonic cleaner, or by hand. When you’re ready to put it back together, the baffles are keyed and indexed for a hassle-free reassembly.
Advantages:
- Excellent decibel reduction ratings backed by testing
- Titanium construction allows it to be strong yet light
Drawbacks:
- Price may put it out of reach for some
BANISH 30 Gold Specs:
- Caliber: .30
- Weight: 13.2 oz
- Diameter: 1.593"
- Length: 8.2"
- Mount Type: Quick Detach
- Material: Titanium
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $1,399

YHM Resonator R2
We put together an enormous suppressor test that pit 27 different cans against one another to see where they ranked in terms of weight, length, price, and sound reduction. When it came time to tally the results, the Yankee Hill Machine Resonator stood at the top in terms of decibel reduction on a .308-caliber rifle. It brought the sound down by 35 decibels. This means that the Resonator R2 will do an excellent job in providing hearing protection while you shoot your full-auto rifle.
The Resonator R2 uses a tubeless design of heat-treated 17-4 stainless steel and a heat-treated 718 Inconel blast baffle which allows for a suppressor that is designed for rigorous use. In short: put it through your most grueling full-auto range session imaginable and it will pass with flying colors.
Advantages:
- Impressive decibel reduction from testing
- Priced right to be affordable for just about everyone
- Includes a quick-detach mount of your choice
Drawbacks:
- They include a muzzle device mount, but you have to use one of theirs
YHM Resonator R2 Specs:
- Caliber: .30
- Weight: 16.8 oz
- Diameter: 1.562"
- Length: 6.9"
- Mount Type: Quick Detach
- Material: Stainless Steel and Inconel
- User-Serviceable: No
- Full-Auto Rated: Yes
- Price: $829.95

SilencerCo Omega 300
SilencerCo's Omega 300 is the lightest, shortest, quietest, full-auto rated, titanium silencer in its category. If you like to have choices and options, it even comes complete with direct thread and fast-attach mounts, as well as a removable Anchor Brake to reduce recoil, which can be replaced with a flat front cap if you don't need the brake.
Even though the Omega 300 is a fully-welded suppressor, it still offers the shooter additional customization options by allowing the use of either the included Anchor Brake or a separate caliber-specific front cap. The ability to choose what to put on the end of the suppressor lets the shooter tailor the Omega 300 to their specific needs, switching between them quickly and easily.
Advantages:
- Multiple mounting options available to suit your needs
- Comes with a brake in the box instead of being an extra cost
- Best in class specs in its category
Drawbacks:
- Fully-welded construction makes it so that it isn't user-serviceable
SilencerCo Omega 300 Specs:
- Caliber: .30
- Weight: 14.7 oz
- Diameter: 1.57"
- Length: 7.08"
- Mount Type: Direct Thread, Bravo, and ASR
- Material: Inconel, Titanium, Stainless Steel, and Cobalt
- User-Serviceable: No
- Full-Auto Rated: Yes
- Price: $939

HUXWRX FLOW 556K
Back pressure and gas in your face are two big problems with many suppressors - especially when firing full-auto - but not with the FLOW 556K. Made from 3D-printed stainless steel, HUXWRX has designed a compact suppressor that doesn’t sacrifice performance for size. It passed all of the US Government’s official tests with flying colors and is full-auto rated even on short barrels.
Their patented Flow-Through technology directs gas out the front, minimizing the gas that comes back to the shooter’s face from the bolt or the charging handle. The flash cap on the front also mitigates muzzle flash, making it an ideal choice in low-light situations.
At just 5.5” inches in length and 12.9 ounces in weight, the FLOW 556K is in a league of its own when it comes to design, durability, and performance.
Advantages:
- Flow-Through technology greatly reduces gas in the shooter's face
- Full-auto rated even on short barrels
- Is user-serviceable for easy cleaning and maintenance
Drawbacks:
- Other options have slightly better decibel reduction ratings
HUXWRX FLOW 556K Specs:
- Caliber: 5.56
- Weight: 12.9 oz
- Diameter: 1.6"
- Length: 5.5"
- Mount Type: Quick Detach
- Material: Stainless Steel
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $1,306
Top Full-Auto Rated Suppressors for Pistols
If the bulk of your full-auto shooting is going to be focused around firearms that are chambered for pistol calibers, then you're going to want a suppressor that's rated for full-auto pistol fire. These are our top four choices.

BANISH 45
The unique design of the BANISH 45 makes it the one suppressor to fit any pistol caliber gun, so slap it on your MP5, UZI, or any other subgun you may have and get to shooting. Simply swap out the pistons (sold separately) and you can attach this suppressor to any multitude of pistols or pistol caliber carbines in your collection. Testing shows the BANISH 45 suppresses a 9mm pistol by 36 decibels – far more sound reduction than the competition.
Made with titanium for the ultimate combination of durability and weight reduction, the BANISH 45 is the lightest in its class at a mere 9.6 oz in the short configuration of 6.7”. You can also run it in the long configuration of 8.6” and still barely notice it’s on your gun because it weighs only 11 oz.
User-serviceable from both ends, this suppressor can be easily and quickly disassembled for configuration changes and cleaning. You can easily clean the baffles by hand with a brush and your favorite solvent. Reassembly is just as easy, thanks to the keyed and indexed baffles. This guarantees that each one will be lined up perfectly for optimum performance.
Advantages:
- Compatible with all of the common pistol calibers
- Titanium construction makes it solid yet lightweight
- Completely user-serviceable from both ends
Drawbacks:
- Method of attachment is direct thread only
BANISH 45 Specs:
- Caliber: .45
- Weight: 9.6 oz or 11 oz
- Diameter: 1 3/8"
- Length: 6.7" or 7.6"
- Mount Type: Direct Thread
- Material: Titanium and Aluminum
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $949

Rugged Obsidian45
With 9mm ammo registering less than 124 decibels, the Rugged Obsidian45 will make your pistol-caliber full-auto fun super quiet and hearing safe.
Rugged’s ADAPT Module introduces modularity to the equation, enabling users to select between the full configuration, measuring 8.6 inches and weighing 12.8 ounces, and the compact configuration, measuring 6.7 inches and weighing 10.7 ounces.
Obsidian45's baffles are machined from 17-4 stainless steel, offering easy cleaning options and heightened durability. In addition, it’s belt-fed rated for pistol calibers up to 45ACP.
This .45 caliber suppressor brings delight to the shooting experience not just because it's quiet, but because of its non-slotted piston design, which establishes a gas seal to significantly reduce gas blowback.
Advantages:
- Ridiculously quiet decibel ratings makes shooting a joy
- Modular design to fit different needs on different guns
- Piston design greatly reduces gas blowback
Drawbacks:
- Outer tube is made from aluminum, which is less durable than other metals
Rugged Obsidian45 Specs:
- Caliber: .45
- Weight: 10.7 oz or 12.8 oz
- Diameter: 1.37"
- Length: 6.7" or 8.6"
- Mount Type: Direct Thread
- Material: Stainless Steel and Aluminum
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $875

SilencerCo Hybrid 46M

Shop Hybrid 46
If you're shooting a pistol-caliber gun, then chances are good that it's small and lightweight. As a result, you may not want a full-length suppressor on the end of the gun. The Hybrid 46M from SilencerCo is a modular suppressor that allows for the removal of a front module which provides the shooter with a shorter and lighter suppressor body.
Because it's a .46-caliber suppressor, it can do things that the other pistol-caliber suppressors on this list cannot do. The Hybrid 46M is capable of effectively suppressing all centerfire pistol cartridges as well as rifle offerings as large as .45-70 Govt and .458 SOCOM, so it can pull double-duty on both your full-auto rifles or pistol-caliber guns. Best of all, it weighs less than one pound even in its longest configuration.
Advantages:
- Even in its full configuration, it's still very light
- Can pull double duty on both pistols and rifles for extra versatility
- Comes with multiple caliber front caps
Drawbacks:
- Not user-serviceable
SilencerCo Hybrid 46M Specs:
- Caliber: .46
- Weight: 12.2 oz or 14.9 oz
- Diameter: 1.57"
- Length: 5.78" or 7.72"
- Mount Type: Quick Detach
- Material: Titanium, Inconel, and Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Yes
- Price: $1,169

YHM Sidewinder M2
Full-auto firearms are expensive, so if you have the ability to save some cash and still have an excellent full-auto suppressor, then you'd be silly not to do it. Experience both affordability and exceptional performance with the Sidewinder M2 suppressor in 45 ACP.
Its overhauled booster system seamlessly accommodates industry-standard pistons from brands such as SilencerCo, Rugged, and Dead Air, providing versatility and ease of use through tool-free piston interchangeability. Furthermore, an improved front cap engagement design simplifies servicing, elevating this suppressor’s functionality.
The Sidewinder M2 blends lightweight durability by utilizing aluminum for its high-efficiency mono-core baffle and for the outer tube. Meanwhile, critical components like the piston, Nielsen Sleeve, and Blast Baffle are precision-engineered from stainless steel, ensuring resilience against corrosion and extreme temperature variations.
Advantages:
- Price is within reach of almost everyone
- Can be used with pistons from multiple different companies
- Aluminum and stainless steel is a great balance of weight and strength
Drawbacks:
- Mono-core baffles can be more prone to first-round pop
YHM Sidewinder M2 Specs:
- Caliber: .45
- Weight: 10.5 oz
- Diameter: 1.375"
- Length: 9.3"
- Mount Type: Direct Thread
- Material: Aluminum and Stainless Steel
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $649.95
Navigating the Suppressor Buying Process
Suppressors are legal to own in 42 of the 50 states, so the first step in buying a suppressor is to ensure that you live in one of those states. Once you've got that established, Silencer Central can help you with the entire purchase process. We'll fill out and file all of the paperwork for you, set you up on a no-interest pay-while-you-wait plan, create a free gun trust for you, and then mail your suppressor right to your door once it's been approved.
Suppressors are NFA Regulated
Just like the full-auto firearms we've been discussing, suppressors are also regulated by the NFA. That means a more in-depth purchasing process that includes the need for a $200 tax stamp. Just like the full-auto firearms, you absolutely must buy a tax stamp for each and every suppressor that you buy. It is not optional and they are not good for multiple suppressors.
It Takes Time to Get Your Suppressor
Again, because suppressors are NFA items, it takes longer to get them that it would a regular firearm or any other kind of firearm accessory.
Filing your Form 4 electronically can help speed up the approval process over using a paper application, but it still isn't as fast as it could and should be. Wait times are measured in months, so you've got to be patient. Still, it's likely to be a faster wait than the one for a full-auto firearm.
Silencer Central Ships Straight to Your Door
Once your silencer has been approved, Silencer Central will ship your new suppressor directly to your door, saving you any more unnecessary steps. It doesn't get any easier than that! Learn more about our direct shipping service.
Invest In a Quality Suppressor Today!
You already know the benefit of investing in a full-auto firearm, so the next logical thing to do is invest in a quality full-auto rated suppressor for that firearm.
By this point, it should be pretty clear that Silencer Central is the easiest way to get your new suppressor. In business for almost 20 years, we're the only dealer that's licensed to sell in all 42 states where suppressors are legal. Our purchasing process is the easiest in the industry, and we're ready to help you take the first step towards investing in a full-auto suppressor.
Contact Silencer Central today and let's get your paperwork started!
If you’ve ever had the opportunity to shoot a fully-automatic firearm, then you know how much fun it is. There’s really only two ways to improve upon that level of fun, and that would be to make them more affordable and to shoot them with a suppressor. Since the former probably isn’t going to happen any time soon, let’s focus …

Barrel Threading Firearms Product Feature Articles
Finding the Best Ruger PC Charger Suppressor: Our Top 5 for 2024
Shooters looking to pair their normal 9mm handgun with something in the same caliber will often agree - the Ruger PC Charger is a terrific choice. It is a fast-handling pistol that bridges the gap between a handgun and a carbine. The appeal is increased accuracy and faster magazine changes. Better still is that the flared magazine well accepts both Ruger Security 9 and SR magazines, as well as Glock mags, giving you more options and available extended magazine capacity. Of course, the next logical step is to suppress it, and we've got just the ticket for that with the five best Ruger PC Charger suppressors.
Suppressor options abound for the PC Charger simply because there are so many 9mm suppressors on the market. We took into consideration the thousands of suppressors that we've sold that are compatible with the Ruger PC Charger and narrowed it down to our top five picks. How'd we get there? We based our picks on things like price, weight, length, decibel reduction, and more, including feedback from our best resource - our amazing customers.
What is the Ruger PC Charger?
While it may not look like it at first, the Ruger PC Charger is a pistol - not a carbine. While it may look a bit different, this gun is legally a handgun. Chambered in 9mm, it can accept Ruger's SR and Security 9 magazines, or it can be used with a magwell adapter and use Glock magazines. Being able to accept Glock mags really opens up the capacity potential. If you really want to have some fun, you can use the 50-round drum magazine from Magpul for the Glock.
Sporting a 6.5" barrel that's threaded 1/2x28, the PC Charger is a takedown pistol that allows you to store it in two pieces for optimum portability. The mag release and charging handle can be switched to the left or right sides, it is compatible with all standard AR pistol grips, and the rear of the gun has an integral picatinny rail for you to attach a brace to it.
What is really cool about the PC Charger is that while it may look a little strange, it is a solid firearm that can be adapted for many different uses, and it is so much fun to shoot.
Can You Suppress the Ruger PC Charger?
Yes, you can absolutely suppress the Ruger PC Charger, and doing so is very easy because it comes from the factory with a threaded barrel. By adding a suppressor to the PC Charger, you'll be able to shoot quieter and with less recoil. Really and truly, it doesn't get any better than that. Adding a suppressor makes this fun-to-shoot pistol even more fun to shoot. That's not any bias talking either. Don't believe us? Try it for yourself!
Choosing the right Ruger PC Charger Suppressor
There's no right or wrong choice when it comes to choosing a suppressor for the Ruger PC Charger, so long as it's compatible with the caliber. Aside from that, it becomes a personal choice with a lot of factors that people may weigh differently.
For some, price is the only deciding factor; their budget drives the decision. For others, it could be the ability to use the suppressor on other guns in different calibers, or perhaps the overall length or weight and how it balances with the Ruger PC Charger. That's why we included five different options, as there is at least one that will fit any factor you might have.
Top 5 Suppressor Models for the Ruger PC Charger
Name | Caliber | Weight | Length | Price |
---|---|---|---|---|
BANISH 45 | .45 | 9.6 oz - 11 oz | 6.7 - 8.6 in | $949 |
SilencerCo Omega 36M | .36 | 9.8 or 12.5 oz | 4.6 - 6.85 in | $ 1,169 |
Yankee Hill Machine R9 | 9mm | 10.7 oz | 5.2 in | $ 579.95 |
Dead Air Wolfman | 9mm | 9.8 oz - 14.4 oz | 5.13 - 7.5 in | $ 899 |
Rugged Obsidian9 | 9mm | 8.7 oz - 12.7 oz | 4.8 - 7.8 in | $820 |
There are a ton of suppressors that will work on a Ruger PC Charger, but we wanted to wade through the multitude of options and drill down into the top models. We've taken into consideration things like caliber compatibility, modularity, decibel reduction, build construction, weight, length, and more. So, without further ado, here are our picks for the top suppressor models for the Ruger PC Charger.

BANISH 45
Even though it is a .45-caliber suppressor, the BANISH 45 shines on any pistol caliber gun, including the 9mm Ruger PC Charger. When it comes to sound suppression, the BANISH 45 is hard to beat. Tests show that it knocks down 9mm by a whopping 36 decibels!
Constructed of titanium and aluminum to make a product that is both lightweight and incredibly durable, the BANISH 45 weighs just 9.6 oz in the short configuration of 6.7”. You can also run it in the long configuration of 8.6” for the highest level of sound suppression and still barely notice it’s on your Ruger PC Charger because it weighs only 11 oz.
Suppressors are expensive, and it's unlikely that you'll only use it on this one gun. The BANISH 45's versatility in terms of length, weight, and caliber compatibility means that you can use it on a bunch of other pistol-caliber firearms, too!
Advantages:
- Modular design lets the shooter decide which size is best
- Premium build quality from titanium
- Easy to clean and maintain from both ends
Drawbacks:
- No QD mounting options
BANISH 45 Specs:
- Caliber: .45
- Weight: 9.6 oz or 11 oz
- Diameter: 1 3/8"
- Length: 6.7" or 7.6"
- Mount Type: Direct Thread
- Material: Titanium and Aluminum
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $949

SilencerCo Omega 36M
If you want a suppressor that is also capable of being used with some popular rifle calibers, then the SilencerCo Omega 36M should be considered.
The Omega 36M was built on a two-piece modular design that allows for the removal of the front section. This provides the shooter with a shorter and lighter suppressor that still offers impressive sound performance on a Ruger PC Charger.
The Omega 36M short configuration measures 4.90” and weighs just 9.8 ounces. This is perfect for the shooter who prizes weight and length above all else. For those who want the best sound suppression without worry of size or weight, the long configuration is just 6.85” and weighs 12.5 ounces. Made of stainless steel, titanium, and Cobalt 6, both long and short configurations of the Omega 36M are full-auto rated. (Yeah, we know the PC Charger is semi-auto only, but it's nice to have options!)
Cross-platform compatibility means that the Omega 36M can be used with a variety of other SilencerCo pistons, Charlie, ASR, and 3-Lug accessories.
Advantages:
- Can be used with some rifle calibers, too
- Able to be used for full-auto
- Build quality is top-notch
Drawbacks:
- Unable to be serviced by the user
SilencerCo Omega 36M Specs:
- Caliber: .360
- Weight: 9.8 oz or 12.5 oz
- Diameter: 1.57"
- Length: 4.9" or 6.85"
- Mount Type: ASR Mount
- Material: Cobalt, Titanium, and Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Yes
- Price: $1,169

Yankee Hill Machine R9
The Yankee Hill Machine R9 gives you the best bang for your buck out of any of the suppressors on this list. Even after you factor in the $200 tax stamp, this suppressor still costs $240 less than the next least expensive suppressor on this list - before you add the stamp!
Built from stainless steel and utilizing a fully-welded, tubeless design, the YHM R9 was created to be ruggedly durable to matter what. The YHM R9 is no one-trick pony either. It is compatible with a wide variety of calibers, including .17 HMR, 9mm NATO, 5.56 NATO, .300BLK, .350 Legend, 6.5 Grendel, and .308 Winchester.
Mounting options abound, as the R9 is compatible with the YHM Phantom QD adapter, 3-lug adapter, Nielson adapter, and other direct thread sizes.
Advantages:
- Price simply cannot be beat
- Stainless steel construction is very strong
- Can be used with a variety of different calibers
Drawbacks:
- Not modular in design
Yankee Hill Machine R9 Specs:
- Caliber: 9mm
- Weight: 10.7 oz
- Diameter: 1.562"
- Length: 5.2"
- Mount Type: Direct Thread
- Material: Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Limited
- Price: $579.95

Dead Air Wolfman
All components of the Wolfman from Dead Air are made of fully welded 17-4 PH stainless steel. This allows for the highest levels of strength and durability while still delivering a suppressor that doesn't weigh as much as a boat anchor. It’s the perfect balance of toughness and lightweight. The Wolfman's performance has been optimized to provide maximum sound suppression at both the muzzle and at the shooter's ear for a pleasant shooting experience for both the shooter and those in the vicinity.
Since the Ruger PC Charger is big for a pistol, you may not always want to run a full-length suppressor on it. Because the Wolfman is modular in design, you can choose between a short or long configuration. Either way you choose, it still provides exceptional sound suppression. For extra decibel reduction, the front cap can contain a user-provided rubber wipe that can drop sound suppression levels even further.
Advantages:
- Rated for full-auto fire
- Modular design for user size preferences
- Wipes can be used for extra sound suppression
Drawbacks:
- Not user-serviceable
Dead Air Wolfman Specs:
- Caliber: 9mm
- Weight: 9.8 oz or 14.4 oz
- Diameter: 1.618"
- Length: 5.13" or 7.5"
- Mount Type: Direct Thread
- Material: Stainless Steel
- User-Serviceable: No
- Full-Auto Rated: Yes
- Price: $899

Rugged Obsidian9
Quiet is the name of the game with the Rugged Obsidian9. Rugged has published that you can expect suppression levels down to 135.5 dB in the short form and down to 121.4 in the full-size configuration. Those are both well below the 140 dB thresh hold to be considered hearing-safe.
Like many of the options on this list, the modularity of Rugged’s ADAPT Module gives users the ability to choose between the full configuration at 7.8 inches and 12.7 ounces, and the compact configuration at 4.8 inches and 8.7 ounces. The choice is yours to switch between at will.
Constructed with stainless steel keyed baffles and an outer tube made of aluminum, the Obsidian9 provides you with a durable suppressor that is easy to maintain while also being light.
Advantages:
- Incredible decibel reduction results
- Modular design lets the shooter pick the size
- User serviceable for easy maintenance
Drawbacks:
- Aluminum isn't as durable as stainless steel or titanium
Rugged Obsidian 9 Specs:
- Caliber: 9mm
- Weight: 8.7 oz or 12.7 oz
- Diameter: 1.37"
- Length: 4.8" or 7.8"
- Mount Type: Direct Thread
- Material: Stainless Steel and Aluminum
- User-Serviceable: Yes
- Full-Auto Rated: Yes
- Price: $820
Factors to Consider When Choosing the Best Suppressor for You
When picking out a suppressor for your Ruger PC Charger, there are a number of different things to take into consideration. You'll obviously want to look into the decibel reduction ratings for different makes and models, as well as how things like the size, weight, and length of the suppressor impacts the gun's overall performance and use. Recoil reduction can also be considered, as well as price.
Beyond that, you have to remember that suppressors are NFA items, which means that they are subject to a different set of laws than the Ruger PC Charger you're using it with. The laws aren't hard to understand, and we go over all that information in our article on NFA items.
Hearing Protection
Obviously, the biggest benefit of a suppressor is the decibel reduction. Being able to shoot quieter is awesome, and it's something that you can't duplicate without a suppressor simply because of how a suppressor works. Speaking of how a suppressor works - real life isn't Hollywood. No suppressor can make any gun truly movie-quiet, but one can definitely lower the decibel level down to a comfortable range where it won't damage your hearing.
When added to the end of the barrel of your Ruger PC Charger, a suppressor allows the gases created from firing the gun to expand before reaching the end of the muzzle. This expansion slows down the gases slightly, which means that they generate less noise when coming out of the muzzle. More than anything, a suppressor is a hearing protection device.
Felt Recoil Reduction
Because of the way suppressors dissipate escaping gases, it means that you'll also experience less felt recoil when shooting suppressed. That recoil reduction is great for new and seasoned shooters alike. With less recoil, you can shoot longer without fatigue, and it makes it more pleasant for shooters who are just learning. Plus, less recoil means less muzzle rise, which makes it easier to get back on target for the next shot. Remember, though, that this isn't Hollywood. Just as a suppressor won't make a gun silent, it also won't eliminate all recoil.
Bang for Your Buck
For most people, price is a big factor for choosing a suppressor. Sure, it would be awesome if everyone could afford the top-of-the-line, latest and greatest, most expensive suppressor on the market, but that's just not reality. The fact of the matter is that you have to weigh your options and pick the best suppressor for you and your budget.
Be sure to consider how often you'll be shooting suppressed, what other guns you may be using it on, who will be with you when you're shooting, etc. All of these things can help you decide where to place your priorities when deciding which suppressor provides you with the best bang for your buck.
Find Your Perfect Suppressor at Silencer Central
There are a wide variety of suppressors on the market today, and the ones mentioned above are just a small sampling of the ones that would be a perfect fit for the Ruger PC Charger. If you have questions, our staff are happy to help you find the right suppressor. Not only for the Ruger, but just about any firearm you own. Have one you love that doesn't come with a pre-threaded barrel? No worries. We have a service for that, too.
At Silencer Central, we've perfected the suppressor buying process over the course of almost 20 years. We're the nation's largest silencer dealer and the only one that's licensed to sell to people in all 42 states where suppressors are legal. Plus, we'll ship it right to your front door once it has been approved.
Contact us today to get started. We make silence simple.
FAQs
Yes, pistol silencers are legal. Silencers, while regulated, actually make guns safer for everyone. They reduce the risk of hearing loss, allowing gun owners to operate without earplugs, which in turn, helps them be much more aware of their surroundings.
So yes. With the exception of 8 states (California, Illinois, New York, New Jersey, Massachusetts, Rhode Island, Delaware, Hawaii), and one federal district, Washington D.C, owning suppressors is legal in the United States of America. If you want to know more about the specific regulations on silencers in your state, read our state-by-state guide on silencer ownership.
And if the process seems a little daunting, don’t worry. Silencer Central is here to help you navigate the buying process, wait time, and paperwork. We’re licensed in all 42 states where pistol silencers are legal.
Yes, absolutely. Silencers offer many of the same benefits to pistol shooters as they do to rifle and shotgun shooters. Even the best Pistol silencers tend to get a bad rap because unlike rifles or shotguns, pistols are often bought to conceal or be discreet.
However, a suppressed pistol is a great training aid. Suppressors reduce recoil and noise flinch. A silencer makes a gun safer and more manageable, with less risk of hearing loss, and allows you to take off your hearing protection and be aware of the space around you. A silencer also reduces noise pollution, recoil, and muzzle flash, and increases accuracy. In some cases, it might even increase the velocity of the bullet.
Yes, you can most definitely suppress a 9mm. While handgun and pistol suppression is less popular than say, suppressing a hunting rifle, it is still a great option. If you’re using it for home defense, a pistol suppressor greatly reduces the deafening sound of a gun going off indoors.
Shooters looking to pair their normal 9mm handgun with something in the same caliber will often agree – the Ruger PC Charger is a terrific choice. It is a fast-handling pistol that bridges the gap between a handgun and a carbine. The appeal is increased accuracy and faster magazine changes. Better still is that the flared magazine well accepts both …